hjertis's Posts

Hi, We have nine ESXi 7.0u3 hosts and vCenter 7.0u3 in our VMware datacenter. We are using virtual distributed switch and connected all vmkernal adapters (VMDK0) to the same portgroup as the vCenter... See more...
Hi, We have nine ESXi 7.0u3 hosts and vCenter 7.0u3 in our VMware datacenter. We are using virtual distributed switch and connected all vmkernal adapters (VMDK0) to the same portgroup as the vCenter with no VLAN id. Now we are going to migrate this porgroup to two new NICs trunked and connectes to the same network with the same IP-address but with VLAN id 10. Is that possible without loosing the connectivity and how can we do that? I`am looking forward to your feedback. Thanks in advance! Best regards, Audun.  
Thank you again for very useful info, Andrè! I think I will try your ESXCLI-command on my ESXi 7.0u3c with the high CPU utilization first. esxcli software profile install -d "/vmfs/volumes/datastor... See more...
Thank you again for very useful info, Andrè! I think I will try your ESXCLI-command on my ESXi 7.0u3c with the high CPU utilization first. esxcli software profile install -d "/vmfs/volumes/datastore1/<Dell-Offline-Bundle>.zip" -p <Profilename> --ok-to-remove --dry-run As I told you I am not so familiar with esxcli commands so what do I type in for the <Profilename> ? Thanks in advance! /Audun  
Thanks Andrè I am not so familiar with using the esxcli. The six Dellemc  Esxi hosts are installed by using the DellEMC 7.0 u1c customized ISO by using the baseline and Lifecycle Manager in vCenter... See more...
Thanks Andrè I am not so familiar with using the esxcli. The six Dellemc  Esxi hosts are installed by using the DellEMC 7.0 u1c customized ISO by using the baseline and Lifecycle Manager in vCenter 7.0 Is it not recommended to use the same metod to upgrade the Esxi hosts from 7.0u1c to 7.0u3c using the DellEmc 7.0u3c customized ISO by using vCenter 7.0u3c? /Audun
Hi Andrè Thank you for your reply The problem with the upgraded ESXi host is that the CPU utilization is very unstable. The ESXi host works fine for many hours with many VMs on. Suddenly the uti... See more...
Hi Andrè Thank you for your reply The problem with the upgraded ESXi host is that the CPU utilization is very unstable. The ESXi host works fine for many hours with many VMs on. Suddenly the utililization increase to 100% og the VMs disconnect from the ESXi host for later on to be stable again. Maybe I will reinstall the ESXi host by using the esxi 7.0u3c dellemc customized ISO to solve the problem. I have six  more DellEmc  ESXi 7.0u1c hosts to upgrade to 7.0u3c. What upgrade-metod do you recommend ?  /Audun
Hi, We have upgraded our vCenter to 7.0u3c without problem. Now we want to update our six DellEMC R7525 ESXi host from 7.0u1c to 7.0u3c in the VMware cluster. I have upgraded one ESXi host from 7.... See more...
Hi, We have upgraded our vCenter to 7.0u3c without problem. Now we want to update our six DellEMC R7525 ESXi host from 7.0u1c to 7.0u3c in the VMware cluster. I have upgraded one ESXi host from 7.0u1c to 7.0u3c by importing DellEMC 7.0u3c customized ISO file to the vCenter, created a new baseline in Lifecycle Manager and remediate to the ESXi host. After the updgrade the ESXi host is very unstable and the CPU utilization is 100%... What is the best way to upgrade the DELLEMC R7525 ESXi hosts from 7.0u1c to 7.0u3c? What about Convert to an Image in LifeCycle Manager and use DellEMC addon? Thanks in advance for your respons! /Audun
Hi, We are running vCenter  VCSA 7.0u2b and tree ESXi 7.0u1c hosts in a HA-cluster in our VMware datacenter.. After a power-outage, one of our three ESXi hosts in the HA-cluster is red in the vCent... See more...
Hi, We are running vCenter  VCSA 7.0u2b and tree ESXi 7.0u1c hosts in a HA-cluster in our VMware datacenter.. After a power-outage, one of our three ESXi hosts in the HA-cluster is red in the vCenter and we got the error "vSphere HA agent for this host has an error. vSphere HA agent cannot be installed or configured" I have tried the following, but the error is still there: Put the ESXi host in maintenance mode and reboot the host Disconnect and connect the host to vCenter Reconfigure for vSphere HA at the host Check that the host has enough space using esxcli command vdf -h Removed the HA VIB using the "VMware-fdm-uninstall.sh" script. Exit host out of Maintenance Mode and saw  the client be pulled from the vCenter and reinstalled at the ESXi host. I hope you can help me to solve this problem so we can get HA for that cluster up and running again. Thanks in advance! Best regards, Audun