Viktor_2018's Posts

Good afternoon! I talked with a Dell specialist, and he said that they recommend performing snapshots on the SC3020. Since snapshots can speed up storage performance. 1. I wanted to clarify if I create snapshots for each Lun as described above and they will be stored only 24 hours. It will be right? (2 Luns are for storing backups, 2 Luns for storing non-critical virtual machines) 2. I have 4 Luns on DELL, all of them are created under VMFS. At the moment I have 3 Lun in the red zone. Well, that’s logical, as Thick Provision Lazy Zeroed was created in Lun data. (Example 1Lun 3TB - 1 Thick Provision Lazy Zeroed 2.9 TB) But Thick Provision Lazy Zeroed itself is not fully occupied in the system. What to do or is this a normal practice?

Good day. There is for example a network 192.168.0.1/24 virtual machines work on it. There are SFP + cards in the servers that are interconnected by a separate switch with ip 10.0.0.1/24, which does not have access to the 192.168.0.1/24 network. The question is how to configure backups to run through SFP + data? Veritas and VEEM see only Vcenter 6.7 over the network 192.168.0.1/24. On the virtual machine where Veritas is installed, a network interface with SFP + has been added. As I understand it is impossible to add a second network interface to Vcentr I don’t want to drag backups over the work network, especially when there are 10 GB ports. Who as implemented?