I talked to Dell and HPE these days mentioning that issue and they all referring to that linked blog entry and told me ESX7 on SD card installation is still fine https://core.vmware.com/resourc...
See more...
I talked to Dell and HPE these days mentioning that issue and they all referring to that linked blog entry and told me ESX7 on SD card installation is still fine https://core.vmware.com/resource/esxi-system-storage-changes#section1
@MMTC @tserreyn Have a look at my topic regarding the issue. https://communities.vmware.com/t5/VMware-vSphere-Discussions/Updates-host-patches-do-not-install/td-p/2860502 You can install the p...
See more...
@MMTC @tserreyn Have a look at my topic regarding the issue. https://communities.vmware.com/t5/VMware-vSphere-Discussions/Updates-host-patches-do-not-install/td-p/2860502 You can install the patch that is the latest version manually and then you are fine. Or as @Doubletap wrote it should be possible to install that patch/ that patches creating a single patch baseline for that patch and apply that baseline to the hosts. Nevertheless I would have expected the patches autoinstalled by the vcsa.
Update 2b was a total failure it seems. It even was deleted in the list of Build numbers and versions of VMware ESXi. https://kb.vmware.com/s/article/2143832?lang=en_US
Hi there Syncing HCL via Lifecycle Manager gives me an absolutely useless error: What could be the problem? Where to check? Updates are synching fine. Regards
Hello Should I set all RDMs in a cluster to perennially reserved or only the WSFC RDMs? We always flagged only the WSFC RDMs. https://blogs.vmware.com/virtualblocks/2020/07/31/using-perennially-re...
See more...
Hello Should I set all RDMs in a cluster to perennially reserved or only the WSFC RDMs? We always flagged only the WSFC RDMs. https://blogs.vmware.com/virtualblocks/2020/07/31/using-perennially-reserved-flag-wsfc-rdms/ Regards
Everytime I asked that question to VMware support the support gave another date. Starting with mid June 21, then mid Juli 21 and now the latest answer was mid August 21.
Hi there Is it possible to clone the ESXi installation from SD-card to SSD/HDD? I have done it only the other way yet -> HDD to SD-card If possible could anyone please post a how-to!? Any help is...
See more...
Hi there Is it possible to clone the ESXi installation from SD-card to SSD/HDD? I have done it only the other way yet -> HDD to SD-card If possible could anyone please post a how-to!? Any help is much appreciated! Thanks in advance!
Okay. Here is my solution. First of all VMware has no solution for the problem yet. It will be fixed in a later release as the support wrote. Which one they could not tell. We did it the following ...
See more...
Okay. Here is my solution. First of all VMware has no solution for the problem yet. It will be fixed in a later release as the support wrote. Which one they could not tell. We did it the following way: I downloaded the latest version of the missing patch/vib to a shared datastore that is available to all the affected hosts. Then I logged on via SSH to the affected hosts and installed it manually. I had to install only the one that is the latest version then all others were gone too. The line to enter in my case: esxcli software vib update -v /vmfs/volumes/yourshareddatastore/intel-nvme-vmd-en_2.6.1.1001-1OEM.700.1.0.15843807_17797370/vib20/intel-nvme-vmd/INT_bootbank_intel-nvme-vmd_2.6.1.1001-1OEM.700.1.0.15843807.vib Reference for the step by step guide is: https://kb.vmware.com/s/article/2008939
I got the problem here: Updates / host patches do not install - VMware Technology Network VMTN I smell VMware cluster**bleep**up again. I shure will open a ticket.
Hello I got the baseline in "Non-Critical Host Patches (Predefined)" as non compliant listet. There are 5 updates listet: If i start the installation those updates do not install. I...
See more...
Hello I got the baseline in "Non-Critical Host Patches (Predefined)" as non compliant listet. There are 5 updates listet: If i start the installation those updates do not install. I do not know why. Install starts and ends without error or so. What is the reason? Any suggestions? Thanks for help. @mod: if in wrong category pls move My SR on the topic: 21244941608