Hi MBreidenbach0, Thanks so much for your reply. I have 2 hosts with their virtual machines but these hosts are not in a HA cluster. The PowerCLI scritps that you use in you lab environment, w...
See more...
Hi MBreidenbach0, Thanks so much for your reply. I have 2 hosts with their virtual machines but these hosts are not in a HA cluster. The PowerCLI scritps that you use in you lab environment, were they created by yourself or they are downloaded by the vmware web site? Thanks so much.
Hi, Tomorrow, the technicians go to cut the electric current to do the maintenance of the company. I need to power off the server ESXi automatically planning the hour with his virtual machines ...
See more...
Hi, Tomorrow, the technicians go to cut the electric current to do the maintenance of the company. I need to power off the server ESXi automatically planning the hour with his virtual machines remotely before this correctly. I would like to know if there is a possibility to power off the server correctly by command or by graphic interface without have to power off machine by machine, that is to say, to power off the server ESXi and the machines by the same time Thanks so much. Best Regards.
Hi, Tomorrow, the technicians go to cut the electric current to do the maintenance of the company. I need to power off the server ESXi automatically planning the hour with his virtual machines ...
See more...
Hi, Tomorrow, the technicians go to cut the electric current to do the maintenance of the company. I need to power off the server ESXi automatically planning the hour with his virtual machines remotely before this correctly. I would like to know if there is a possibility to power off the server correctly by command or by graphic interface without have to power off machine by machine, that is to say, to power off the server ESXi and the machines by the same time Thanks so much. Best Regards.
Hi MohamadAlhoussein, Thanks so much for your reply. I solved the problem deleting the RAID Volume in the physical server, then, i tried to install the VMware ESXi 6.0 again and i didn't ha...
See more...
Hi MohamadAlhoussein, Thanks so much for your reply. I solved the problem deleting the RAID Volume in the physical server, then, i tried to install the VMware ESXi 6.0 again and i didn't have any problem.
Hi. I have a server, Dell Precision T3500. I want to install the VMware ESXi 6.0, but, when i try to install it, i have the next error: How can i do to solve this problem? Thanks ...
See more...
Hi. I have a server, Dell Precision T3500. I want to install the VMware ESXi 6.0, but, when i try to install it, i have the next error: How can i do to solve this problem? Thanks so much.
Finally, I managed to solve the problem. I booted from the CD-ROM Drive, I entered in the rescue mode, I identified the disk containing the root file system, I selected the option to initiali...
See more...
Finally, I managed to solve the problem. I booted from the CD-ROM Drive, I entered in the rescue mode, I identified the disk containing the root file system, I selected the option to initialise the shell and I ran these commands: root@debian:~# grub-install /dev/sda root@debian:~# update-grub root@debian:~# reboot
I want to virtualize a linux physical machine (Ubuntu server) in a virtual machine.
I followed the steps of this guide: https://www.joe0.com/2017/01/12/how-to-convert-a-remote-physical-linux-server...
See more...
I want to virtualize a linux physical machine (Ubuntu server) in a virtual machine.
I followed the steps of this guide: https://www.joe0.com/2017/01/12/how-to-convert-a-remote-physical-linux-server-to-a-virtual-machine-vmware-virtualbox-instructions/
All was well until I tried to convert physical machine with VMware vCenter Converter Standalone tool, so that, I had an error before to end the task:
1 — imgbb.com
I looked for information about this issue and I found an article in the knowledge base of VMware: https://kb.vmware.com/s/article/2052628
1. Mount the original Linux distribution DVD on the virtual machine and boot from DVD à OK
2 — imgbb.com
2. Select the rescue option from the boot menu à OK
https://ibb.co/ciNSOH
3. Identify the disk containing the root file system à I have a doubt
If I select, the first option, I have this issue:
https://ibb.co/fUXNqx
https://ibb.co/dCCcOH
So, I select the next option:
https://ibb.co/eV7Yxc
4. But, when I select the step 4: Select the option to initiate a shell.
https://ibb.co/cSRRHc
5. And I try to do the step 5: Fix the BIOS boot partition.
In the example says:
https://ibb.co/bRU2qx
But, when I execute these commands, I don´t have a similar screen:
https://ibb.co/eeC0cc
I want to know if by not having this screen I am not able to install or to repair GRUB to be able to launch the virtualized virtual machine.
Thanks so much.
P.D. Sorry to put the URL instead of the images, but, when I add the picture to upload, I receive this error message “That image type is forbidden” and I can’t upload them.
Moderator note by wila: Moved from VMware Workstation discussions for vCenter Converter Standalone discussions
After look for a lot of information about this issue, I found the solution. This problem is because of an old snapshot linked to vmx. Before doing anything, we must check if there are block...
See more...
After look for a lot of information about this issue, I found the solution. This problem is because of an old snapshot linked to vmx. Before doing anything, we must check if there are blocked VMDSs in the Proxy in this link: “Removing Stuck VMDK’s from the Veeam Proxy - https://www.veeam.com/kb1775” After this, we can repair manually the replica in this link: “How-To: Manually Repair a VMware Replica created by Veeam - https://www.veeam.com/kb1773 “ After this, my problem was solved.
Hi, When I try to delete the snapshot of the replication virtual machine, I have the next error message: "Error vim.fault.GenericVMConfigFault" And i can't do anything. Thanks.
I contacted with Veeam Support, and i download the mlocate service from this page: http://download.opensuse.org/repositories/server:/search/SLE_11_SP3/x86_64/ I installed it with the wget ...
See more...
I contacted with Veeam Support, and i download the mlocate service from this page: http://download.opensuse.org/repositories/server:/search/SLE_11_SP3/x86_64/ I installed it with the wget command. Thanks so much.
If I well understood, i don’t need to choose these checks, not? The checks "Enable application-aware processing" and "Enable guest file system indexing" must be disable, is that? Thanks so ...
See more...
If I well understood, i don’t need to choose these checks, not? The checks "Enable application-aware processing" and "Enable guest file system indexing" must be disable, is that? Thanks so much daphnissov
I have this error: I contacted with Veeam and they told me that i have to install "mlocate" in the VMware Server" How can i do to install it? Because with yum it is impossible. Th...
See more...
I have this error: I contacted with Veeam and they told me that i have to install "mlocate" in the VMware Server" How can i do to install it? Because with yum it is impossible. Thanks so much.
When I am authenticated in vSphere Web Client, I receive this error ("vSphere Web Client session is no longer authenticated. Click OK to log in again") and the browser windows close. How c...
See more...
When I am authenticated in vSphere Web Client, I receive this error ("vSphere Web Client session is no longer authenticated. Click OK to log in again") and the browser windows close. How can i do to be able to solve this issue? Thanks so much.
I don't know how, but, fortunately, the problem is solved doing this procedure, when, before, I did it, and I was not able to solve it. Thanks so much.
