Hi. Running home ESXI 7 with 2 port Broadcom nic, onboard Realtek and USB nic. I plan to shutdown, replace nic, boot and re-configure vNetwork. How to go about removing the Broadcom nic and install...
See more...
Hi. Running home ESXI 7 with 2 port Broadcom nic, onboard Realtek and USB nic. I plan to shutdown, replace nic, boot and re-configure vNetwork. How to go about removing the Broadcom nic and installing a i350-t4?
I noticed that there is a new A04 Dell customized image for 6.7u1 but it is the same build number as the older A03 version. What has changed and do I apply A04 to A03? Name: VMware-VMvisor...
See more...
I noticed that there is a new A04 Dell customized image for 6.7u1 but it is the same build number as the older A03 version. What has changed and do I apply A04 to A03? Name: VMware-VMvisor-Installer-6.7.0.update01-10764712.x86_64-DellEMC_Customized-A04.zip Release Date: 2019-03-14 Build Number: 10764712
Not interested in unsupported use of sound controller in esxi vm that will likely to cause instability issues. Would like to know the intended use of adding a sound controller in esxi vm. So far,...
See more...
Not interested in unsupported use of sound controller in esxi vm that will likely to cause instability issues. Would like to know the intended use of adding a sound controller in esxi vm. So far, I get sound from a esxi vm with a sound controller in a remote console. Maybe that is all the sound controller in a esxi vm is good for. Anything else?
"ESXi and Workstation are two completely different products." Obviously. In esxi vm settings, there is a sound controller. I would like to know how you make use of that setting. Do you have...
See more...
"ESXi and Workstation are two completely different products." Obviously. In esxi vm settings, there is a sound controller. I would like to know how you make use of that setting. Do you have a clue what it is for? "Are you asking for sound in an ESXi? Why?" I want to know how to properly use the sound controller setting in a esxi vm.
In a esxi 6.7u1 vm with sound controller started from web client I get no sound. The same vm started from VMWare Workstation sound works. How do I get sound out of my esxi host like VMWare Wor...
See more...
In a esxi 6.7u1 vm with sound controller started from web client I get no sound. The same vm started from VMWare Workstation sound works. How do I get sound out of my esxi host like VMWare Workstation?
Test only the network speed VM to VM with iperf and post results (optimum is 10Gbps). Usually the bottle neck would be disk io. iperf is intensive on VM cpu and esxi host ram.
VMs in the same port group, vswitch and vlan will not send network traffic over uplink. Just make sure esxi host has adequate cpu and memory resources. Understand How Virtual Machine Traffic ...
See more...
VMs in the same port group, vswitch and vlan will not send network traffic over uplink. Just make sure esxi host has adequate cpu and memory resources. Understand How Virtual Machine Traffic Routes
If possible, try to test the serial port and cable by redirecting the esxi direct console to it. Attach a vt100 terminal. Boot esxi and press shift-O Append the following boot options "gdbP...
See more...
If possible, try to test the serial port and cable by redirecting the esxi direct console to it. Attach a vt100 terminal. Boot esxi and press shift-O Append the following boot options "gdbPort=none logPort=none tty2Port=com1";
The problem may be related to the motherboard. Which AB350 is it exactly? I have had bad results with ASRock AB350M Pro 4 with Ryzen 1700 and esxi. The setup worked for the first month and then s...
See more...
The problem may be related to the motherboard. Which AB350 is it exactly? I have had bad results with ASRock AB350M Pro 4 with Ryzen 1700 and esxi. The setup worked for the first month and then started to PSOD, reboot or freeze during idle but never when active.
I am able to passthru a Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI with EFI boot in a Windows 10 vm on 6.7 Neither this or the bios boot solution is viable for my main compute...
See more...
I am able to passthru a Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI with EFI boot in a Windows 10 vm on 6.7 Neither this or the bios boot solution is viable for my main computer. Hoping that the Renesas usb passtrhu on EFI vm will work in the next update.
Thanks for the info. So if trying to passthru my Renesas USB controller is the source of my problem with 6.7 then I am stuck in 6.5 until a fix or I may have to look at a USB over IP solution.
I upgraded my Dell R610 to 6.7 using the Dell customized offline bundle. Now I have some unknown entries in Hardware Monitor Sensors and 34/35 are unknown under Storage. Is this normal? System...
See more...
I upgraded my Dell R610 to 6.7 using the Dell customized offline bundle. Now I have some unknown entries in Hardware Monitor Sensors and 34/35 are unknown under Storage. Is this normal? System Sensors dd-in Card 2 vFlash 1 System Board 1 DKM Status 0 System Board 1 Power Optimized 0 Storage Intel Corporation PowerEdge R610 I/O Hub to ESI Port #0 Unknown Cannot report on the current status of the physical element Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 #1 Unknown Cannot report on the current status of the physical element Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 #3 Unknown Cannot report on the current status of the physical element Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 #7 Unknown Cannot report on the current status of the physical element Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 9 #9 Unknown Cannot report on the current status of the physical element Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 #28 Unknown Cannot report on the current status of the physical element Intel Corporation 82801 PCI Bridge #30 Unknown Cannot report on the current status of the physical element Intel Corporation PowerEdge R610 82801IB (ICH9) LPC Interface Controller #31 Unknown Cannot report on the current status of the physical element Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers #20 Unknown Cannot report on the current status of the physical element Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers #20 Unknown Cannot report on the current status of the physical element Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers #20 Unknown Cannot report on the current status of the physical element Intel Corporation PowerEdge R610 USB UHCI Controller #26 Unknown Cannot report on the current status of the physical element Intel Corporation PowerEdge R610 USB UHCI Controller #26 Unknown Cannot report on the current status of the physical element Intel Corporation PowerEdge R610 USB EHCI Controller #26 Unknown Cannot report on the current status of the physical element Intel Corporation PowerEdge R610 USB UHCI Controller #29 Unknown Cannot report on the current status of the physical element Intel Corporation PowerEdge R610 USB UHCI Controller #29 Unknown Cannot report on the current status of the physical element Intel Corporation PowerEdge R610 USB EHCI Controller #29 Unknown Cannot report on the current status of the physical element Intel Corporation 2 port SATA IDE Controller (ICH9) #31 Unknown Cannot report on the current status of the physical element Broadcom Corporation Broadcom NetXtreme II BCM5709 1000Base-T #0 Unknown Cannot report on the current status of the physical element Broadcom Corporation Broadcom NetXtreme II BCM5709 1000Base-T #0 Unknown Cannot report on the current status of the physical element Broadcom Corporation Broadcom NetXtreme II BCM5709 1000Base-T #0 Unknown Cannot report on the current status of the physical element Broadcom Corporation Broadcom NetXtreme II BCM5709 1000Base-T #0 Unknown Cannot report on the current status of the physical element LSI / Symbios Logic Dell PERC H700 Integrated #0 Unknown Cannot report on the current status of the physical element Matrox Electronics Systems Ltd. PowerEdge R610 MGA G200eW WPCM450 #3 Unknown Cannot report on the current status of the physical element Battery 26.3 Unknown Cannot report on the current status of the physical element Battery 7.1 Unknown Cannot report on the current status of the physical element CPU1 Level-1 Cache Unknown Cannot report on the current status of the physical element CPU1 Level-2 Cache Unknown Cannot report on the current status of the physical element CPU1 Level-3 Cache Unknown Cannot report on the current status of the physical element CPU2 Level-1 Cache Unknown Cannot report on the current status of the physical element CPU2 Level-2 Cache Unknown Cannot report on the current status of the physical element CPU2 Level-3 Cache Unknown Cannot report on the current status of the physical element Memory Green Physical element is functioning as expected
I did update using vmw-depot from 6.5.0 Update 1 (Build 7967591) to 6.7 using profile as described. Unfortunately, with 6.7 setup my vm with the pci devices will not begin to boot. Can it be that...
See more...
I did update using vmw-depot from 6.5.0 Update 1 (Build 7967591) to 6.7 using profile as described. Unfortunately, with 6.7 setup my vm with the pci devices will not begin to boot. Can it be that it works for you because you are passing just one device (LSI 2008)?