Sorry, this is the vmkernel 2015-06-25T16:14:46.055Z cpu1:76299)<6>ahci_scsi_abort: cmd 0x28 (0x412401651d40), entering... 2015-06-25T16:14:46.055Z cpu1:76299)<7>ata3: ahci_port_reset, entering...
See more...
Sorry, this is the vmkernel 2015-06-25T16:14:46.055Z cpu1:76299)<6>ahci_scsi_abort: cmd 0x28 (0x412401651d40), entering... 2015-06-25T16:14:46.055Z cpu1:76299)<7>ata3: ahci_port_reset, entering... 2015-06-25T16:14:48.284Z cpu0:76299)<6>ata3: ahci_port_reset, hard reseting port 2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: exception Emask 0x10 SAct 0x1 SErr 0x10000 action 0xa frozen 2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: irq_stat 0x00400000, PHY RDY changed 2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3: SError: { PHYRdyChg } 2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: cmd 60/01:00:00:10:00/00:00:00:00:00/40 tag 0 ncq 512 in res 80/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error) 2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: status: { Busy } 2015-06-25T16:14:49.031Z cpu2:4632)<6>ata3: soft resetting link 2015-06-25T16:14:49.031Z cpu2:4632)<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 2015-06-25T16:14:53.841Z cpu7:76299)<4>ata3: port is slow to respond, please be patient (Status 0x80) 2015-06-25T16:15:08.341Z cpu0:4632)<6>ata3.00: configured for UDMA/133 2015-06-25T16:15:08.341Z cpu0:4632)<6>ata3: EH complete 2015-06-25T16:15:08.379Z cpu3:76299)<6>ata3: ahci_port_reset: SUCCEEDED 2015-06-25T16:15:08.379Z cpu3:76299)<6>ahci_scsi_abort: cmd 0x28 (0x412401651d40), SUCCEEDED 2015-06-25T16:15:08.379Z cpu7:6605)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x28 (0x412400768b00, 5066) to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" on path "vmhba33:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense da$ 2015-06-25T16:15:08.379Z cpu7:6605)ScsiDeviceIO: 2318: Cmd(0x412400768b00) 0x28, CmdSN 0x1 from world 5066 to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0xb 0x47 0x0. 2015-06-25T16:15:09.021Z cpu0:5066)ScsiDevice: 1463: Device t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ has been turned off administratively. 2015-06-25T16:15:18.716Z cpu6:5066)Vol3: 692: Couldn't read volume header from control: Not supported 2015-06-25T16:15:18.716Z cpu6:5066)Vol3: 692: Couldn't read volume header from control: Not supported 2015-06-25T16:15:18.716Z cpu6:5066)FSS: 4972: No FS driver claimed device 'control': Not supported 2015-06-25T16:15:18.751Z cpu6:5066)VC: 1547: Device rescan time 23 msec (total number of devices 2015-06-25T16:15:18.751Z cpu6:5066)VC: 1550: Filesystem probe time 30 msec (devices probed 5 of 2015-06-25T16:15:32.871Z cpu4:4981)ScsiDevice: 1470: Device t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ has been turned on administratively. 2015-06-25T16:15:35.873Z cpu4:6607)LVM: 13024: One or more LVM devices have been discovered. 2015-06-25T16:16:15.881Z cpu3:76299)<6>ahci_scsi_abort: cmd 0x35 (0x41240166b300), entering... 2015-06-25T16:16:15.881Z cpu3:76299)<7>ata3: ahci_port_reset, entering... 2015-06-25T16:16:18.121Z cpu7:76299)<6>ata3: ahci_port_reset, hard reseting port 2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen 2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: irq_stat 0x00400000, PHY RDY changed 2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3: SError: { PHYRdyChg } 2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 res 80/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error) 2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: status: { Busy } 2015-06-25T16:16:18.873Z cpu2:4632)<6>ata3: soft resetting link 2015-06-25T16:16:18.873Z cpu2:4632)<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 2015-06-25T16:16:23.668Z cpu4:76299)<4>ata3: port is slow to respond, please be patient (Status 0x80) 2015-06-25T16:16:48.171Z cpu1:76299)<3>ata3: COMRESET failed (errno=-16) 2015-06-25T16:16:48.894Z cpu2:4632)<4>ata3.00: qc timeout (cmd 0xec) 2015-06-25T16:16:48.894Z cpu2:4632)<4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) 2015-06-25T16:16:48.894Z cpu2:4632)<3>ata3.00: revalidation failed (errno=-5) 2015-06-25T16:16:48.894Z cpu2:4632)<4>ata3: failed to recover some devices, retrying in 5 secs 2015-06-25T16:16:53.906Z cpu2:4632)<6>ata3: hard resetting link 2015-06-25T16:16:59.447Z cpu2:4632)<4>ata3: port is slow to respond, please be patient (Status 0x80) 2015-06-25T16:17:03.938Z cpu0:4632)<3>ata3: COMRESET failed (errno=-16) 2015-06-25T16:17:03.938Z cpu0:4632)<6>ata3: hard resetting link 2015-06-25T16:17:04.463Z cpu0:4632)<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 2015-06-25T16:17:04.464Z cpu0:4632)<6>ata3.00: configured for UDMA/133 2015-06-25T16:17:04.464Z cpu0:4632)<6>ata3: EH complete 2015-06-25T16:17:04.575Z cpu5:76299)<6>ata3: ahci_port_reset: SUCCEEDED 2015-06-25T16:17:04.575Z cpu5:76299)<6>ahci_scsi_abort: cmd 0x35 (0x41240166b300), SUCCEEDED 2015-06-25T16:17:04.575Z cpu4:6605)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x35 (0x4124007b0040, 0) to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" on path "vmhba33:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data:$ 2015-06-25T16:17:04.575Z cpu4:6605)ScsiDeviceIO: 2318: Cmd(0x4124007b0040) 0x35, CmdSN 0x4dfe from world 0 to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0xb 0x47 0x0. 2015-06-25T16:17:04.575Z cpu6:5085)ScsiDevice: 1271: Could not flush cache of local device t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ. Failure End of log reached.