Bettens_Alexand's Posts

Bettens_Alexand · ‎09-09-2021

Hello Duncan, what is best way for isolation address, on vsan data network or on Witness traffic network ? If on Witness traffic network WE have only one address reacheable localy si there IS an er...

Hello Duncan, what is best way for isolation address, on vsan data network or on Witness traffic network ? If on Witness traffic network WE have only one address reacheable localy si there IS an error from each esxi. Thank you

Bettens_Alexand · ‎10-09-2019

For QoS you can find QoS limit on storage policy and you manage your policy by vm, by vdisk or for a vm group. You have too, checksum functionality on vsan for data About network you can u...

For QoS you can find QoS limit on storage policy and you manage your policy by vm, by vdisk or for a vm group. You have too, checksum functionality on vsan for data About network you can use 1g or 10g or more it's the same from vsphere Compatible platform for vsan = all x86 platform but use "vsan HCL" to verify storage controler compatibility and the same for disk

Bettens_Alexand · ‎10-08-2019

Hello, Yes VSAN have similar specifications but sometimes better and sometimes not. For exemple with vSAN you have: - encryption - deduplication when full flash only - 64 nodes maximum but...

Hello, Yes VSAN have similar specifications but sometimes better and sometimes not. For exemple with vSAN you have: - encryption - deduplication when full flash only - 64 nodes maximum but if you want you can add another cluster - ressource pool ok - iscsi access ok - snapshots yes better version than vsphere snapshots - active active yes with streched cluster - synchronous replication by default with ftt=1 up to 3 - thin provisionning by default but you can thick as you want 25% up to 100% - you can manage your VM storage vm by vm with SPBM directly on vcenter it's better than by lun. Etc. You can see all of functionnalities on VMware storagehub

Bettens_Alexand · ‎04-08-2019

Hello, need help on this problem where all services won't start at the reboot of the appliance. History: After an isolation of the VCSA HA Cluster, i have deleted all VCSA passive and witnes...

Hello, need help on this problem where all services won't start at the reboot of the appliance. History: After an isolation of the VCSA HA Cluster, i have deleted all VCSA passive and witness VM. i destroy vcha cluster (vcha-destroy -f) and re-up the eth0 with his DNS but .... after reboot : root@192 [ ~ ]# service-control --status Stopped: applmgmt lwsmd pschealth vmafdd vmcad vmcam vmdird vmdnsd vmonapi vmware-analytics vmware-cis-license vmware-cm vmware-content-library vmware-eam vmware-imagebuilder vmware-mbcs vmware-netdumper vmware-perfcharts vmware-pod vmware-postgres-archiver vmware-rbd-watchdog vmware-rhttpproxy vmware-sca vmware-sps vmware-sts-idmd vmware-stsd vmware-updatemgr vmware-vapi-endpoint vmware-vcha vmware-vpostgres vmware-vpxd vmware-vpxd-svcs vmware-vsan-health vmware-vsm vsan-dps vsphere-client vsphere-ui Running: vmware-statsmonitor vmware-vmon top - 16:39:55 up 12 min, 2 users, load average: 0.02, 0.02, 0.00 Tasks: 199 total, 1 running, 198 sleeping, 0 stopped, 0 zombie %Cpu0 : 0.0/0.0 0[ ] %Cpu1 : 0.0/0.0 0[ ] %Cpu2 : 0.0/0.0 0[ ] %Cpu3 : 0.7/0.7 1[|| ] GiB Mem : 3.2/15.7 [ ] GiB Swap: 0.0/26.0 [ NEED YOUR HELP PLS

All

Bettens_Alexand's Posts

Re: vSAN Stretched Cluster and HA isolation addresses

Re: VSAN Product Specification

Re: VSAN Product Specification

VCSA 6.7U1 After HA isolation and destroyed HA eth0 is up but all services are stopped and won't to start