Dee006's Posts

Hi JVM, 1.Initial replication you can set the RPO for 4 hours untill the replicated to the DR site and later you can reduce to 15 or 30 minutes depends on your business requirement. 2.Few onl... See more...
Hi JVM, 1.Initial replication you can set the RPO for 4 hours untill the replicated to the DR site and later you can reduce to 15 or 30 minutes depends on your business requirement. 2.Few online tools are available to calculate the bandwidth required based on the disk size.Initial seed you definetly go with bandwidth bursting 10+ of link speed and later you can reduce it. 3.For Isolation network you can refer the following documentation,in both source and destination you need to add static routes to work the isolated network. Create a VM Network Adapter to Use for Incoming Replication Traffic on the Combined vSphere Replication Appliance 4.DNS and time sync is must for vR implementation,it will break the pair and you can add the host entry if you are having small environment.
I think you have just customized image and not injected into the ESXi operating system.
TKS, you have hosted ESXi on Hyperv 2016,whether I'm correct?If yes what is the generation you have selected to host the ESXi in Hyper-V.Prefer to go with Gen1 which suits most of the Operatin... See more...
TKS, you have hosted ESXi on Hyperv 2016,whether I'm correct?If yes what is the generation you have selected to host the ESXi in Hyper-V.Prefer to go with Gen1 which suits most of the Operating system and network card as legacy which suits most of OS. Install a VMWare ESXi 6.0 Hypervisor in a Hyper-V VM – PowerShell, Programming and DevOps
emmclure, Few option are available with VMware products and few with third party.I would recommend you to analyse varies platform with respect to cost and implementation complexity .Let say if... See more...
emmclure, Few option are available with VMware products and few with third party.I would recommend you to analyse varies platform with respect to cost and implementation complexity .Let say if you want the portal where users can set expiration days so that VMware vCloud Director is best platform do with VMware vRealize automation.You can do lot of black magic in it.If you are looking cost effective solution build a environment with VMware automation with third party workflow. Give out a try Integration with VMware vSphere Using the New Open Sourced Software Development Kits - VMware Open Source Blog
TonyCI, I believe while adding manually the diagnostic partition it might added the whole available configuration.If no data available you can delete the partition and then recreate the diagno... See more...
TonyCI, I believe while adding manually the diagnostic partition it might added the whole available configuration.If no data available you can delete the partition and then recreate the diagnostic partition.Make sure the host and datatstore(sDRS) are in maintenance mode. Recreating : VMware vSphere 5.1 Deleting :  Deactivate and Delete a Core Dump File
hason, Mostly VASA appliance will be provided by the third party vendor.Which storage appliance you are going to opt.If you are planning for Dell VMAX here the official guide. https://www.e... See more...
hason, Mostly VASA appliance will be provided by the third party vendor.Which storage appliance you are going to opt.If you are planning for Dell VMAX here the official guide. https://www.emc.com/collateral/software/white-papers/h10630-vmware-vasa-symmetrix-wp.pdf
Hi Sam, I've came across similar incident few days back,but the only way is rebooting the host.
Hi David, Have you tried to inject the driver or customized ISO for the NIC driver.I suspect it is due to incompatible NIC driver loaded leads to ESXi problematic.
Hi Mic, Have you changed any configuration in vmdk file?
Hi, It looks like the CPU scheduling was failed to perform due to which the vKerenl send out the NMI to CPU make panic.Can you try to analyse the vmkdump or raise a case with Support for the a... See more...
Hi, It looks like the CPU scheduling was failed to perform due to which the vKerenl send out the NMI to CPU make panic.Can you try to analyse the vmkdump or raise a case with Support for the assistances.
Hi, Can you to try add the bus logic at the end of vmkfstools and see if it works? Cloning and converting virtual machine disks with vmkfstools (1028042) | VMware KB
Hi M4T, Please try with automatic and then check whether the Graphic card visible inside your VM.If it is not visible then you need to investigate on the compatibility matrix with respective t... See more...
Hi M4T, Please try with automatic and then check whether the Graphic card visible inside your VM.If it is not visible then you need to investigate on the compatibility matrix with respective to hypervisor version. Configure 3D Graphics and Video Cards
Hi Raju, It seems be your hostd agent might not function properly.This might due to several reason 1.Issue with underlying storage 2.Hostd Might crashed due to memory pressure. Analyse... See more...
Hi Raju, It seems be your hostd agent might not function properly.This might due to several reason 1.Issue with underlying storage 2.Hostd Might crashed due to memory pressure. Analyse the hostd,vmkerenl log in var log path.One solution would be rebooting the host,if it is production try to migrate the VM to different host(most cases won't work) get the downtime and reboot the host.
Hi, Can you try to create the vm with different name?
Hi, Have you configured the GPU as passthrough device? Add an NVIDIA GRID vGPU to a Virtual Machine
Hi, I had similar experience,migrated Boot from SAN to local HDD.Removed from Cluster and re-add the host to vds according to existing pNIC position. When you plan to install the ESXi to di... See more...
Hi, I had similar experience,migrated Boot from SAN to local HDD.Removed from Cluster and re-add the host to vds according to existing pNIC position. When you plan to install the ESXi to different storage the MOID of the host will get change and no use in addition to vCenter or DVS even you maintain same network configuration. - DK
Hi Alan, CVE,this is related to Redhat Kernel security and ESXi kernel is distinct from it.If any security related concern will be available in the VMware Security Advisories.If it is vulnerab... See more...
Hi Alan, CVE,this is related to Redhat Kernel security and ESXi kernel is distinct from it.If any security related concern will be available in the VMware Security Advisories.If it is vulnerable VMware security team will dispatch the patch via KB or email subscribed in the Advisories Link  : Advisories
Hi, Please share the hardware configuration and VMkernel/VMware.logs of any VM which get freeze. VMware logs - Available in the VM folder vmkernel logs - /var/logs/vmkernel
Hi Mike, If you are using E1000/e1000e nic then you might face some kind of nic freeze try to change the nic type. https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=... See more...
Hi Mike, If you are using E1000/e1000e nic then you might face some kind of nic freeze try to change the nic type. https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2109922 If you are using vmxnet3 type and get freeze try to increase the rx buffer size in the vNIC. https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2039495
Hi, Have you changed any settings while converting due to Conversion like disk shrink or re-partitioning? - the VM had no connection to the network Try to uninstall and re-install the VMwa... See more...
Hi, Have you changed any settings while converting due to Conversion like disk shrink or re-partitioning? - the VM had no connection to the network Try to uninstall and re-install the VMware tools. Try to change the network card type. - The two hard drives (40 and 100 GB) are recognized but I can't see the data Check with previous setup has get change in the sda(40 GB) or sdb(100 GB) Boot from Live CD and check the data are visible. - the keyboard encoding is different from the original in workstation and I can't type for example "-" and other characters Try using VMRC Console incase you are using 6.X platform of ESXi