Had a bad power supply, the server powered down unexpectedly, and now the Datastore is very corrupted ( seriously? VMFS is that bad? VM's were not even powered on. ) VOMA was able to identify m...
See more...
Had a bad power supply, the server powered down unexpectedly, and now the Datastore is very corrupted ( seriously? VMFS is that bad? VM's were not even powered on. ) VOMA was able to identify many errors, but stopped checking due to this: Phase 4: Checking pathname and connectivity. ON-DISK ERROR: Invalid alloc map entry Index 1 type 1,free 0, notWritten 0 ERROR: Offset(77824) for IO on file is greater than or equal to the fileLength(77824) VOMA failed to check device : Limit exceeded When I use the command "voma -m vmfs -f fix -d ", I get: Checking if device is actively used by other hosts Running VMFS Checker version 2.1 in fix mode Initializing LVM metadata, Basic Checks will be done ERROR: Fix Mode is not yet supported for VMFS-6 VOMA failed to check device : Not Supported Any help to resolve this is much appreciated it. Thanks. Backgroud Info: ESXi 6.5a VMFS6 ( default ) Datastore on a NVMe PM951 SSD
Does your Asus H81I-Plus support Passthrough / VT-D ? given a supported Xeon CPU? i was considering your motherboard, but now I definitely consider to buy one.
I can't speak for ESXi5.5, but in ESXi5.0U3, My R9 290 aren't recognized, and when they are passthrough to the Windows 7 ( 64bit, EFI boot ), the R9 290 couldn't be used.
YOu got the screen of death? what motherboard / chipset are you using? I have Z77, and I can start the VM with the passthroughed SATA controller, BUT, the VM doesn't recognize any of them. W...
See more...
YOu got the screen of death? what motherboard / chipset are you using? I have Z77, and I can start the VM with the passthroughed SATA controller, BUT, the VM doesn't recognize any of them. Where do you get the 5.5 from December? i only see the initial release of 5.5 in October.
For those that is using 5.5 U1, or just upgraded to 5.5 U1. Can you can confirm if the onboard SATA can be passthroughed? in ESXi5.5, my Onboard H77 SATA ports are not working when in passthrou...
See more...
For those that is using 5.5 U1, or just upgraded to 5.5 U1. Can you can confirm if the onboard SATA can be passthroughed? in ESXi5.5, my Onboard H77 SATA ports are not working when in passthrough mode. It can be assigned to a VM, but VM don't see it.
Has anyone try dual GPU yet? I have a Z77 chipset motherboard, and can't seem to get the 2nd GPU ( on separate PCIe card ) recognize by the VM, though it can be passthrough to the same VM.
Have you try to passthrough your onboard SATA controller? Or passthrough your HD4600 iGPU to a vM and see if it can output to HDMI? I'm really interested to build an Intel Haswell ESXI host a...
See more...
Have you try to passthrough your onboard SATA controller? Or passthrough your HD4600 iGPU to a vM and see if it can output to HDMI? I'm really interested to build an Intel Haswell ESXI host and use it as a HTPC as well.
YOu know what, I have ESXi5.0 U3 installed, and I can passthrough a HD7850 and use it to play game flawlessly. But I can not do the same with my R9 290. No matter what I do, The VM seems not abl...
See more...
YOu know what, I have ESXi5.0 U3 installed, and I can passthrough a HD7850 and use it to play game flawlessly. But I can not do the same with my R9 290. No matter what I do, The VM seems not able to use the R9 290. I have the latest beta driver installed, and the R9 is recognize, but with a exclamation mark. I have not try with ESxi5.5 yet because in 5.5, the onboard Intel Storage SATA is broken ( can not passthrough ).
Good news! The 5.0U3 ISO is working flawlessly. I can passthrough the USB controller and restart the host without loosing the config; I can passthrough my Radeon HD7850 to a Windows 7 VM.
Has any one try the 5.0 U3 build yet? i'm on 5.1U1 and it's really frustrating that I can't get a keyboard and mouse, or USB controller to passthrough. ESXi 5.5 can passthrough USB controller...
See more...
Has any one try the 5.0 U3 build yet? i'm on 5.1U1 and it's really frustrating that I can't get a keyboard and mouse, or USB controller to passthrough. ESXi 5.5 can passthrough USB controller, but onboard SATA passthrough doesn't work.
Any one has issue with the Video output not being full screen / doesn't reach edge to edge? I have ESXi 5.1 installed, passthrough AMD HD7850. Video output to the screen, via HDMI, 1080p, but ...
See more...
Any one has issue with the Video output not being full screen / doesn't reach edge to edge? I have ESXi 5.1 installed, passthrough AMD HD7850. Video output to the screen, via HDMI, 1080p, but the video is shrinked to the center, doens't reach to side and top/bottom edges.
"pciPassthru0.msiEnabled=False" is a must for my case. I also need to disable Multiple Monitor on iGPU. I have a ASRock Z77 motherboard and I can only select "PCIE" as the dedicated video inste...
See more...
"pciPassthru0.msiEnabled=False" is a must for my case. I also need to disable Multiple Monitor on iGPU. I have a ASRock Z77 motherboard and I can only select "PCIE" as the dedicated video instead of selecting "ONboard". Now, i have another issue, that the outputted Video from my HD7850 doesn't reach full screen. Even at 1080p, the viewable area is shrinked dramatically. Anyone see this problem?
I have similar issue here, 7850 passthrough and no signal on screen. I can view the VConsole though. Here is my problem, if I switch the VM to EFI mode, it can not boot because It can't find ...
See more...
I have similar issue here, 7850 passthrough and no signal on screen. I can view the VConsole though. Here is my problem, if I switch the VM to EFI mode, it can not boot because It can't find a bootable device ( can't see the virtual disk nor the ISO image on a DVD device ). When I see some of you can change the EFI settings, how do you change the EFI setting of a VM / guest? If I need to disable iGPU, does that mean i have to do it from the host BIOS?
