nsolop's Posts

Be sure to have volume sharow copy service enabled and started on the computer you are trying to convert.
Hi Clark, you can always use the old version of converter against your virtual machines and then upgrade the VMware Tools and virtual hardware to the lastest version. also what you can do i... See more...
Hi Clark, you can always use the old version of converter against your virtual machines and then upgrade the VMware Tools and virtual hardware to the lastest version. also what you can do is to present the luns to the new hosts (if there is a SAN), power off and migrate your VMs to the new hosts. Then upgrade VMware tools and virtual hardwre. Hope this helps. Regards, Nicolás
Have you tried to power off the VM and then edit the settings of the disk?. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Pl... See more...
Have you tried to power off the VM and then edit the settings of the disk?. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Remove the resources reservation at the host level and work with the reservation at the VM settings page. I think that you have reserved more resources at the host that the VM will need to power ... See more...
Remove the resources reservation at the host level and work with the reservation at the VM settings page. I think that you have reserved more resources at the host that the VM will need to power on and that's why it's telling you that you have not enough resources to power on the VM. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
OK, I know it's old and not a desktop computer but I have a few HP Proliant ML115 servers with 8GB of RAM on my lab. Are cheap and have been running about 10~15 machines on each. Regards... See more...
OK, I know it's old and not a desktop computer but I have a few HP Proliant ML115 servers with 8GB of RAM on my lab. Are cheap and have been running about 10~15 machines on each. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hello and welcome to the forums, Have seen ESXi running smoothly on a Dell Optiplex 780. Hope this helps. Regards, Nicolás
Sobre qué producto de VMware estás corriendo la máquina virtual? La máquina migra de un host a otro? probaste, ademas de reinstalar, cambiar el modelo de la virtual nic? Regards/Saludos P... See more...
Sobre qué producto de VMware estás corriendo la máquina virtual? La máquina migra de un host a otro? probaste, ademas de reinstalar, cambiar el modelo de la virtual nic? Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Have you tried uninstalling VMware Workstation? Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awardin... See more...
Have you tried uninstalling VMware Workstation? Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hola y bienvenido a los foros. Tu servidor virtual tiene las VMware Tools instaladas?. Probaste de cambiarle el tipo de virtual nic que le estás asignando?. Regards/Saludos Por favor n... See more...
Hola y bienvenido a los foros. Tu servidor virtual tiene las VMware Tools instaladas?. Probaste de cambiarle el tipo de virtual nic que le estás asignando?. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Are you running the converter wizard with the local administrator user? If not give it a try. Enviado desde mi BlackBerry de Personal
Good information. Thanks for sharing. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points... See more...
Good information. Thanks for sharing. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hi, You will need 1 license per processor plus a vcenter license. The basic license that includes vmotion is Essentials Plus: http://www.vmware.com/files/pdf/vsphere_pricing.pdf Regards... See more...
Hi, You will need 1 license per processor plus a vcenter license. The basic license that includes vmotion is Essentials Plus: http://www.vmware.com/files/pdf/vsphere_pricing.pdf Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hola, Fijate acá porque aclaran que la tarjeta de red no está soportada para la instalación: http://www.vm-help.com/esx40i/esx40_whitebox_HCL.php http://www.vm-help.com/forum/viewtopic.p... See more...
Hola, Fijate acá porque aclaran que la tarjeta de red no está soportada para la instalación: http://www.vm-help.com/esx40i/esx40_whitebox_HCL.php http://www.vm-help.com/forum/viewtopic.php?f=13&t=2554 Esto es porque el equipo no se encuentra en la lista de compatibilidad de VMware. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hi folks, First time configuring EMC's recoverpoint failback plugin here. Everything went fine during the installation but whe a failback is performed we get the error: Failed to set the re... See more...
Hi folks, First time configuring EMC's recoverpoint failback plugin here. Everything went fine during the installation but whe a failback is performed we get the error: Failed to set the re-signature bit. The failback continues, a LUN/VMFS rescan is performed automatically on every host and then fails to register the VMs on the protected site. We have to manually resignature every affected lun by the failback process and then add every virtual machine has to be added to the inventory again. Assume that the register process fails because the hosts cannot access the VMFS volumes with marked signatures. The scenario is as follows: vSphere 4.1 SRM 4.1 EMC Recoverpoint plugin 1.0.1.1 Recoverpoint 3.3 SP1 Any ideas? Thanks in advance. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Do you have any error message? can you upload a screenshot? Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forg... See more...
Do you have any error message? can you upload a screenshot? Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hello, VMware Converter can convert your virtual servers that runs on the old ESX. Think about your VMs like physical servers and forget that they are virtual machines. A few things: Shu... See more...
Hello, VMware Converter can convert your virtual servers that runs on the old ESX. Think about your VMs like physical servers and forget that they are virtual machines. A few things: Shutdown every service you can on the vms so if there is a change in the data during the convertion you don't need to re-sync the VMs Upgrade VMware Tools on the new ESX Host so you can take advantage of the new features Hope this helps. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Si vmotion te va a funcionar siempre y cuando cumplas con los siguientes requerimientos: Un servidor vcenter server otro host con licencia estandar la o las maquinas virtuales que se van a ... See more...
Si vmotion te va a funcionar siempre y cuando cumplas con los siguientes requerimientos: Un servidor vcenter server otro host con licencia estandar la o las maquinas virtuales que se van a mover de un host a otro deben estar en un storage compartido Que los dos hosts tengan port groups con el mismo nombre Eso entre alguna otra cosa que se me puede estar escapando. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hola, Se activan "automágicamente" pero si te fijas en el link que te había recomendado la versión standard no soporte el hot-add. Regards/Saludos Por favor no olvides calificar las resp... See more...
Hola, Se activan "automágicamente" pero si te fijas en el link que te había recomendado la versión standard no soporte el hot-add. Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Disculpas, Ahí vi en el título del thread que es una licencia Standard. Por lo que tengo entendido no soporta Hot-Add. Pegale una mirada a esto sobre las funcionalidades en licencias de vSp... See more...
Disculpas, Ahí vi en el título del thread que es una licencia Standard. Por lo que tengo entendido no soporta Hot-Add. Pegale una mirada a esto sobre las funcionalidades en licencias de vSphere Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin
Hola, A que te referis con cambiar los recursos? a agregarle CPU o memoria a las máquinas virtuales sin apagarlas??? Que versión de licencia compraste??? Regards/Saludos Por favor no ol... See more...
Hola, A que te referis con cambiar los recursos? a agregarle CPU o memoria a las máquinas virtuales sin apagarlas??? Que versión de licencia compraste??? Regards/Saludos Por favor no olvides calificar las respuestas que te resultaron de ayuda o fueron correctas Please, don't forget the awarding points for "helpful" and/or "correct" answers. ________________________________________ Nicolás Solop VMware vExpert 2010 - VCP 410- VCP 310 - VAC - VTSP My company Blog (Wetcom Group Blog) Follow me on Twitter My Linkedin Profile Join to Virtualizacion en Español group in Likedin