If this is an FC LUN, then you will need to provide your SAN with the WWN for your HBAs. Once that is done, "Rescan All" in the VIC and you should see the LUN. If this is iSCSI, you need to e...
See more...
If this is an FC LUN, then you will need to provide your SAN with the WWN for your HBAs. Once that is done, "Rescan All" in the VIC and you should see the LUN. If this is iSCSI, you need to ensure that your SAN and NICs on the ESX host are on the same VLAN/Subnet for each path you are setting up, that CHAP is setup properly if in use, etc. Look up the documentation for your iSCSI storage. If this is local storage in another server, then you need to do something serious reading, take a class, or just quit your job. j/k