buijspa's Posts

buijspa · ‎02-24-2021

Hi, I would like to know if the URL Content Redirection Feature is supported with Edge Chromium. We are currently running Horizon 7.5 - Windows 10 20H2 It works for IE11, Chrome but we have troubl...

Hi, I would like to know if the URL Content Redirection Feature is supported with Edge Chromium. We are currently running Horizon 7.5 - Windows 10 20H2 It works for IE11, Chrome but we have trouble to activate it in Edge Chromium (with the Chrome extension version) Thanks in advance for your replies! Kr, Buijspa

buijspa · ‎05-27-2018

Hi, Sometimes, just after a logoff from a previous session, users are waiting +/- 10 minutes on "Applying audit Policy..." at logon before receiving their desktop (event viewer : GPO users appli...

Hi, Sometimes, just after a logoff from a previous session, users are waiting +/- 10 minutes on "Applying audit Policy..." at logon before receiving their desktop (event viewer : GPO users applied event 1503 : user ProcessingTimeInMilliseconds 682484). It seems that something is waiting for a timeout from the previous session. We are on the latest version (9.1.0.175). If we wait between 2 consecutive sessions, no problem. Found in logs-1.log : Logging to this file because configured log file '\\XXX\UEM_PROFILE\buijspa.DOMAIN\logs.log' is in use. Any idea? Thanks, buijspa

buijspa · ‎06-10-2017

Hi All, We use the drive letter for our home drive (defined in AD under the user account properties). We noticed that often (not always), only when we use the appvolumes disk, our drive...

Hi All, We use the drive letter for our home drive (defined in AD under the user account properties). We noticed that often (not always), only when we use the appvolumes disk, our drive is not mounted at logon. I saw that the CVApps disk uses the drive letter (the first free letter during logon process) and, when the mounting process is finished, CVApps does not use this drive letter anymore : It seems that there is a collision between the Appvolumes service using the drive (first available drive letter) temporarly and our Home Drive mounted during the logon process. This is very annoying because our homedrive is not mounted when the logon process is finished ( ex : no folder redirection etc...). Could you confirm this behaviour? Is it a way to avoid this "collision"? Thank you for your help! buijspa

buijspa · ‎06-07-2017

Solved : directflex refresh keyboard settings must be enable in the GPO :smileyblush:

buijspa · ‎06-07-2017

Hi All, I'm working in an Institution using 24 different languages, the keyboard settings are very important. I've noticed that some keyboard settings are saved but are not applied when the use...

Hi All, I'm working in an Institution using 24 different languages, the keyboard settings are very important. I've noticed that some keyboard settings are saved but are not applied when the user logs on : In the keyboards.zip -> Flex profile.zip : [HKEY_CURRENT_USER\Software\Microsoft\CTF\SortOrder\Language] "00000000"="00000402" "00000001"="00000405" "00000002"="00000406" "00000003"="00000407" "00000004"="00000408" "00000005"="0000040b" "00000006"="00000410" "00000007"="00000413" "00000008"="00000418" "00000009"="0000041a" "00000010"="0000041d" "00000011"="00000426" "00000016"="00000427" "00000012"="00000809" "00000013"="0000080c" "00000014"="00000816" "00000015"="00000c0a" In the Workstation registry (regedit) : [HKEY_CURRENT_USER\Software\Microsoft\CTF\SortOrder\Language] "00000000"="00000402" "00000001"="00000405" "00000002"="00000406" "00000003"="00000407" "00000004"="00000408" "00000005"="0000040b" "00000006"="00000410" "00000007"="00000413" "00000008"="00000418" "00000009"="0000041a" "00000010"="0000041d" "00000011"="00000426" "00000012"="00000809" "00000013"="0000080c" "00000014"="00000816" "00000015"="00000c0a" All the other settings are working well, only the keyboard settings cause problem. Any idea? Thanks! buijspa

buijspa · ‎11-26-2013

Hi Christophe, Bad news - here is the answer from VMware support : "At the moment, keyboard sync over PCOIP from thin/zero clients is not currently supported." They wrote a kb article...

Hi Christophe, Bad news - here is the answer from VMware support : "At the moment, keyboard sync over PCOIP from thin/zero clients is not currently supported." They wrote a kb article http://kb.vmware.com/kb/2064865 (not available at the moment I'm writing this comment) They suggest the following workarounds : 1. using a windows client 2. Dedicated pools or desktops with a matching default in the guest o/s for the client-side keyboard. Both of these workarounds are useless for us (21 different keyboard layouts in our Institution) but maybe interesting for you... Cheers, Pat

buijspa · ‎11-21-2013

Hi Christophe, yes that's it. VMware View Client for Win7 or WinXP on a standard computer. I've just received news from VMware benelux team : they told me that VMware and Teradici find the r...

Hi Christophe, yes that's it. VMware View Client for Win7 or WinXP on a standard computer. I've just received news from VMware benelux team : they told me that VMware and Teradici find the root cause of the problem in the logs I sent. Best regards, Pat

buijspa · ‎11-20-2013

Hi Christophe, We opened the ticket few weeks ago. I sent all the asked informations and I've been contacted by VMware support team. We're waiting but I think I'll escalate to VMware benelux...

Hi Christophe, We opened the ticket few weeks ago. I sent all the asked informations and I've been contacted by VMware support team. We're waiting but I think I'll escalate to VMware benelux team. We've also upgraded to 5.2 : same results. We're using Wyse P20, P25 and Samsung NC220 but the problem is still there. There's no problem with the VMware software client@PCoIP. I'll keep you informed. Cheers, Pat

buijspa · ‎11-20-2013

Hi JP, Yes we did. We've opened a ticket at VMware an Teradici supports concerning this problem but Teradici redirect this case to VMware. We're waiting for a solution. I soon as we'll get ...

Hi JP, Yes we did. We've opened a ticket at VMware an Teradici supports concerning this problem but Teradici redirect this case to VMware. We're waiting for a solution. I soon as we'll get a solution//answer, I'll put it here. Regards, Pat

buijspa · ‎08-23-2013

Hi, We've got the same problem with HTML access Nobody has the same problem ? Pat

buijspa · ‎11-01-2012

You're right : No drive redirection with PCoIP, sorry my fault ...

buijspa · ‎11-01-2012

Hi All, we are using PCoIP from Windows PC to connect View Linked Clones. We would like to not allow the local drives redirection. We found GPO parameters to do this with RDP but nothing wit...

Hi All, we are using PCoIP from Windows PC to connect View Linked Clones. We would like to not allow the local drives redirection. We found GPO parameters to do this with RDP but nothing with PCoIP. Any idea ? Thanks, buijspa

buijspa · ‎07-11-2012

Hi Cievo, Problem solved ! :smileycool: I've got other programs writing on %Appdata%/SAP/tmp and crashing. I presume it is the same problem. Do you know if I can put all the sudirectories...

Hi Cievo, Problem solved ! :smileycool: I've got other programs writing on %Appdata%/SAP/tmp and crashing. I presume it is the same problem. Do you know if I can put all the sudirectories under %Appdata% in Merged mode, including the %Appdata%/SAP and %Appdata%/SAP/common subdirectories which are in DirectoryIsolationMode=Full by default after the capture? Is there any risk or side effect to do this? Thanks for your help ! Buijspa

buijspa · ‎07-11-2012

Hi Cievo, In my project, I only found : an %Appdata% sub with attributes.ini containing DirectoryIsolationMode=WriteCopy an %Appdata%/SAP sub with attributes.ini containing DirectoryIs...

Hi Cievo, In my project, I only found : an %Appdata% sub with attributes.ini containing DirectoryIsolationMode=WriteCopy an %Appdata%/SAP sub with attributes.ini containing DirectoryIsolationMode=Full an %Appdata%/SAP/common with attributes.ini containing DirectoryIsolationMode=Full and no %AppData%\Microsoft I suppose that DirectoryIsolationMode=WriteCopy is apply in for %AppData%\Microsoft and under. Is that correct? Is this the good configuration? Do you need to see the package.ini file to debug? Thanks for your help ! Buijspa

buijspa · ‎07-10-2012

Hi Lakshman, you're too fast ! Problem solved, thanks a lot (again...) Best regards, Buijspa

buijspa · ‎07-10-2012

Hi All, we are trying to thinapp SAP GUI. We followed the VMware Solution Readiness document "Virtualizing SAP GUI with VMware Thinapp". Normally, for some text editing, a word component is ...

Hi All, we are trying to thinapp SAP GUI. We followed the VMware Solution Readiness document "Virtualizing SAP GUI with VMware Thinapp". Normally, for some text editing, a word component is integrated in sapgui. To do this, it downloads a word template "SAPscriptWord2007". There, the problems comes. With the thinapp, the sapgui downloads the file to C:\Users\username\AppData\Roaming\Thinstall\SAPGUI\%AppData%\Microsoft\templates Which is logic, as it is the thinapp location. But then, it tries to load the template from C:\Users\username\AppData\Roaming\Microsoft\Templates Test made: - delete the template in both template directories - start thinapp sapgui, and start the text edit application => error message displayed: cannot locate template - template file found in C:\Users\username\AppData\Roaming\Thinstall\SAPGUI\%AppData%\Microsoft\templates - copy the template file from C:\Users\username\AppData\Roaming\Thinstall\SAPGUI\%AppData%\Microsoft\templates to C:\Users\username\AppData\Roaming\Microsoft\Templates => textedit application in sapgui works. I don't know if it is a problem of SAP or Thinapp Could you help? Thanks for your help ! Buijspa

buijspa · ‎07-10-2012

Hi All, we are trying to thinapp SAP GUI. We followed the VMware Solution Readiness document "Virtualizing SAP GUI with VMware Thinapp". But when we are trying to open some PDF documents, we...

Hi All, we are trying to thinapp SAP GUI. We followed the VMware Solution Readiness document "Virtualizing SAP GUI with VMware Thinapp". But when we are trying to open some PDF documents, we received a error message : "The system cannot find the file specified" pointing to the SAPGUI.dat file (see attachement). Any idea on how to link a local (physical installed) PDF Reader with the thinapped SAPGUI ? Thanks for your help ! Buijspa

buijspa · ‎07-10-2012

Hi Lakshman, it's working ! Thanks again ! Buijspa

buijspa · ‎07-07-2012

Hi Lakshman, Hi guys, I would like to change the name of the shortcut placed on the desktop during the thinreg process. I tried to modify the name of the shortcut file on the project (somethi...

Hi Lakshman, Hi guys, I would like to change the name of the shortcut placed on the desktop during the thinreg process. I tried to modify the name of the shortcut file on the project (something like %Common Desktop%\myapp.lnk) and rebuild it but without success. Should I modify something on the package.ini file ? Thanks for your help! buijspa

All

buijspa's Posts

Horizon 7.5 - URL Content Redirection Feature on MSFT Edge Chromium

Painfull logon just after logoff a precedent session

CVApps uses a temporary drive letter?

Re: Keyboards settings saved but not applied

Keyboards settings saved but not applied

Re: PCoIP International Keyboard Layout Synchronization Failed

Re: PCoIP International Keyboard Layout Synchronization Failed

Re: PCoIP International Keyboard Layout Synchronization Failed

Re: PCoIP International Keyboard Layout Synchronization Failed

Re: PCoIP International Keyboard Layout Synchronization Failed

Re: PCoIP : do not allow drive redirection

PCoIP : do not allow drive redirection

Re: SAP GUI and MS-Word Integration

Re: SAP GUI and MS-Word Integration

Re: SAP GUI and PDF Files

SAP GUI and MS-Word Integration

SAP GUI and PDF Files

Re: Changing name off Shortcut

Re: Changing name off Shortcut