none95's Posts

Only issue I have is that it uses too much of my vGPU memory, and RHEL 8 shows a low gpu memory notification. Other than that, it works fine.
Hi there, I'm facing the following problem: - If I connect to my guests using PCoIP it is ultra responsive and fast, both on WAN and LAN; I get 60fps when moving windows and scrolling and eve... See more...
Hi there, I'm facing the following problem: - If I connect to my guests using PCoIP it is ultra responsive and fast, both on WAN and LAN; I get 60fps when moving windows and scrolling and everything is super smooth - But if I connect with Blast, it lags; the difference is quite noticeable; scrolling and moving windows "jumps"; VMware Performance Tracker shows 60fps but I can see it stuttering. All my guests have Nvidia vGPUs. CPU usage is quite low with Blast. Clients also have Nvidia cards. Blast lags with both Nvidia Encoder or standard encoder. Also I can see lag with all my Clients, WAN or LAN, with or without GPU offload, with or without UAG involved, JPEG or H264, HEVC or regular H264. Any idea what can I do to troubleshoot and fix this? Thanks
Linux "multi session" is Tech Preview.
RAS guests boot in 10 seconds, so I'm sure my image and hardware is fast. Not sure if you are familiar with Parallels RAS, but it is like VMware View. It creates linked clones from a master ima... See more...
RAS guests boot in 10 seconds, so I'm sure my image and hardware is fast. Not sure if you are familiar with Parallels RAS, but it is like VMware View. It creates linked clones from a master image, boots them and does a "quickprep", and reboots again and the guest is ready. Same hardware, same vSphere, same image, boots in 10 seconds. Customizes in 10 seconds. The view composer log just shows a "gap" between two entries. I can see log entries at time = t; and then time = t + 5 minutes (for customization). And then time = t and then time = t + 1 minute for regular boot. But there is nothing between the two log entries.
I followed that. Can't use Instant Clones. Horizon Standard + Persistent desktop.s I think this is related to View Composer Agent. It seems to be the one hanging the boot for those minutes. ... See more...
I followed that. Can't use Instant Clones. Horizon Standard + Persistent desktop.s I think this is related to View Composer Agent. It seems to be the one hanging the boot for those minutes. But am unable to fix it.
The "multi-session" bits are missing from the agent you can download.
Hi, I have Windows Server 2012 guest image that can boot in less than 10 seconds. With my previous VDI tool (Parallels RAS) new desktops take 10 seconds to provision and they boot in 10 secon... See more...
Hi, I have Windows Server 2012 guest image that can boot in less than 10 seconds. With my previous VDI tool (Parallels RAS) new desktops take 10 seconds to provision and they boot in 10 seconds as well. RAS clones the machine, powers it on, and I can see it booted after 10 seconds. VMware Tools info on vSphere Web Client shows in seconds as well. RAS uses linked clones. If I use the same exact machine with VMware View, the machine takes 5 minutes to be deployed (Linked Clones), and then takes 1 minute to boot. I can see the machine being powered on by VMware View, but than it takes 5 minutes for VMware Tools IP address to show on vSphere. After customization, the same happens but it takes 1 minute instead. Everything is the same as the machine that boots in 10 seconds, only VMware View guest agent is now in use instead of RAS. I build my images with MDT, so I assure that no RAS Agent is deployed. Just the VMware Agent. Any ideia what can be the problem? Thanks
Hi there, I was able to virtualize and run Office 2013 if no other Office 2013 applications are physically installed on he machine. As soon as one aplication is installed, the dreaded "setu... See more...
Hi there, I was able to virtualize and run Office 2013 if no other Office 2013 applications are physically installed on he machine. As soon as one aplication is installed, the dreaded "setup/fix" scree shows up and the application fails. This is the same problem we had with Office 2010, that was fixed with 4.7.2 and the "deleted" registry keys. Now I'm missing the ones for Office 2013. Does anyone knows the Office 2013 "deleted" registry keys I must add? Thanks.
Hi, The key is a regular volume licensing one, so nothing is HW dependant. I can physically deploy it multiple times without a problem. My capture machine is disconnected from the network, so n... See more...
Hi, The key is a regular volume licensing one, so nothing is HW dependant. I can physically deploy it multiple times without a problem. My capture machine is disconnected from the network, so nothing like online activation will take place. It starts as trial with a excessivelly large trial time. Thanks.
I don't remember. What is the correct way to capture it? Should I launch any component before post scan? By the way, one strange thing was that the thinapp trial had something like 33509 days ... See more...
I don't remember. What is the correct way to capture it? Should I launch any component before post scan? By the way, one strange thing was that the thinapp trial had something like 33509 days until expiration. Is ThinApp messing with any of the licensing components?
Hi there, Was anyone sucessfull into virtualizing Adobe Creative Suite 6.0? I tried but, while the applications do run, they show up as trial on machines that are not the one it was installed... See more...
Hi there, Was anyone sucessfull into virtualizing Adobe Creative Suite 6.0? I tried but, while the applications do run, they show up as trial on machines that are not the one it was installed. Any fix? Thanks.
Yes. I would like to only allow traffic to-from my VPN server from inside the local mode VM. This can be easilly done with ACE, but does not seem possible with View.
Hi there, Is the a way to enforce a local mode VM to be able to only connect to a VPN server (similiar to ACE firewall rulesets)? Thanks.
Sorry for the rant, but will we never get a new major version of ThinApp? Windows 7 outs years ago but you still don't support jump lists? Where is the "ThinApp factory" you were announcing las... See more...
Sorry for the rant, but will we never get a new major version of ThinApp? Windows 7 outs years ago but you still don't support jump lists? Where is the "ThinApp factory" you were announcing last year? No interface to edit ThinApps? No templates (seriously?!) ? The last major change to ThinApp was Horizon, but that requires extra licensing that's not even available outside of America. I'm starting to question if it is worth to keep my SnS active, and if VMware cares about ThinApp.
Hi, Will Thinapps ever support jump lists? What about "pin to taskbar"? Thanks.
Hi, Is there any workaround to make ThinApps show the proper jump lists on WIndows 7 task bar? If not, is it a planned feature? Regards
Hi, All my ThinApps are showing slow file enumeration on Open and Save dialogs. It's not like it's unbearably slow, but it is really noticeable compared to regular apps. I can see the entrie... See more...
Hi, All my ThinApps are showing slow file enumeration on Open and Save dialogs. It's not like it's unbearably slow, but it is really noticeable compared to regular apps. I can see the entries and icons being loaded. They are not immediately "there" like on regular apps. Is this normal, or am I doing something wrong? Thanks
I wonder if that is something legal and supported by VMware. Imagine that ThinApp 5.0 is shipped and uses a different serial. Do you think you would be able to get a ThinApp 5.0 key? By the ... See more...
I wonder if that is something legal and supported by VMware. Imagine that ThinApp 5.0 is shipped and uses a different serial. Do you think you would be able to get a ThinApp 5.0 key? By the way, in the Serial Number Portal is your ThinApp key listed as a View key, a ThinApp 4.0.4 key or ThinApp 4.6 key?
Just to make sure we are speaking about the same scenario: - You don't have standalone ThinApp licenses? - You have View 4 Premier licensed, but you can access ThinApp 4.6 and run it legally?... See more...
Just to make sure we are speaking about the same scenario: - You don't have standalone ThinApp licenses? - You have View 4 Premier licensed, but you can access ThinApp 4.6 and run it legally? - On the downloads page of View 4, you see ThinApp 4.6 as a downloadable component? Thanks.
Hi, If I buy View Premier 4.5 with active SnS, and ThinApp is upgraded (say, from 4.6 to 5.0), will I be able to use the latest version? Or do I have to wait for the next version on View? Is ... See more...
Hi, If I buy View Premier 4.5 with active SnS, and ThinApp is upgraded (say, from 4.6 to 5.0), will I be able to use the latest version? Or do I have to wait for the next version on View? Is VMware Workstation included with View 4.5, as it is on ThinApp? Thanks.