strizzz's Posts

same problem on horizon 7.9 happens yesterday. simply change the protocol on the pool on pcoip, try a login and after that switch back to blast. everythink works correctly
HI, i'm working on the same, problem and after many test I can confirm that in this moment no dell's thinclient is capable to work in a good way with blast protocol. I usually deploy virtual wor... See more...
HI, i'm working on the same, problem and after many test I can confirm that in this moment no dell's thinclient is capable to work in a good way with blast protocol. I usually deploy virtual workstations with horizon view and grid cards. if you want to use pcoip you can use the dell 3040, is quite good also for some cad workloads. dell has just relased the new versione of its console and works very well. I've test 3040 thinOS, 3040 thinlinux, 5060 thinos (with the future release of8.5 firmware), 5060 windows 10iot and none of them is capable to work with blast extreme. After that i've received 2 demo units from 10zig (5800q series and 4400q series) and I can confirm that this zero client is a monster with blast extreme!. It works with this protocol better than a traditional pc
Hi, I've got a strange problem with a customer. I've deployed a VDI enviroment with horizon view 7.3.2 (esxi 6.5) installed and skype for business on the win 10 1703 CBB vms (teradici audio drive... See more...
Hi, I've got a strange problem with a customer. I've deployed a VDI enviroment with horizon view 7.3.2 (esxi 6.5) installed and skype for business on the win 10 1703 CBB vms (teradici audio driver installed). when the user receive a call trought the software he can't ear or speak for the initials 5-6 seconds, after that time the converstation works good. we've tried to use a teradici zero client (pcoip without  s4b optimization) and a windows 10 pc as a client (with s4b optimization enabled). If the customer starts the conversation doesn't have the initial delay and the audio works immediately. if we use s4b from a traditional pc (no vdi) everything works correctly. any suggestions?
you need to create an account with teradici and download the firmware on that site. but... teradici has just create a subscription and you're limited to firmware version 5.x. with the subscripti... See more...
you need to create an account with teradici and download the firmware on that site. but... teradici has just create a subscription and you're limited to firmware version 5.x. with the subscription you can upgrate to 6.x
Did you try to directly connect to a single vm instead of the connection server? do you have windows firewall enabled? I'm usually sell the advanced version (so exclude uem,linked clone..)
Yes, It's supported. I've made a deployment lask week with esxi 6.0 u3 and the 367.92-369.95 Nvidia drivers with horizon 7.1 and everything works great. Did you upgrade the vib inside vmware an... See more...
Yes, It's supported. I've made a deployment lask week with esxi 6.0 u3 and the 367.92-369.95 Nvidia drivers with horizon 7.1 and everything works great. Did you upgrade the vib inside vmware and the windows driver? are you using the lastest client? (v4.4)
Hi, I'm working on a POC enviroment with horizon view 7, nvidia grid cards and dell wyse p25 zero client. I've encountered this strange problem: the customer works with wacom intuos ptz-1230 dev... See more...
Hi, I'm working on a POC enviroment with horizon view 7, nvidia grid cards and dell wyse p25 zero client. I've encountered this strange problem: the customer works with wacom intuos ptz-1230 device (a standard graphics tablet) and when he attach the device to the thinclient, the tablet isn't correctly recognized by windows and appears as "vmware pointing device"  ('ve tried to install wacom drivers but nothing change) I've checked on teradici supporto site and the device is present in the compatibility list https://techsupport.teradici.com/link/portal/15134/15164/Download/2081 I've also tried to configure in redirection mode the device on the thinclient https://techsupport.teradici.com/ics/support/KBAnswer.asp?questionID=616 but nothing change... anyone has encountered a similar problem? thanks
Do you use a professional version of windows or enterprise? if it's a Pro take a look at this Composer – Rearm By default, when View Composer creates linked clones and runs QuikPrep, one o... See more...
Do you use a professional version of windows or enterprise? if it's a Pro take a look at this Composer – Rearm By default, when View Composer creates linked clones and runs QuikPrep, one of the tasks is to rearm licensing. You can prevent this by setting the following registry key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\vmware-viewcomposer-ga SkipLicenseActivation  DWORD           0x1 maybe it's an windows sysprep error during recompose