Rodos's Posts

This document describes the process of configuring a Wyse V10L to work with TCX. This is an open Wiki for the community to evolve and improve. What is TCX TCX are enrichment extensions to allow additional features to your remote sessions. There are currently three extensions and more planned. Multimedia - TCX Multimedia is a software layer on the server that intelligently redirects the multimedia processing tasks dynamically between the client and server. The multimedia stream decodes locally on the client using the local processing power of the device thereby providing complete multimedia playback capabilities overcoming any limitations that are inherent in traditional thin computing architectures. USB Virtualisation - Enables the sharing and discovery of local USB devices as if they were connected directly on the Virtualized Desktop environment. Solves the USB peripheral issues when it comes to deploying thin clients. No more compromise on limited local drivers. The Wyse thin clients now can seamlessly access their USB-based printers, scanners, storage devices, Palm, BlackBerry, and Pocket PC hand­helds over VDI environment. What do I need? You will need : a terminal, a license key for the component of TCX you are enabling (either multi-media or USB redirection) the Wyse software for the virtual machine an FTP server to place the config files a DHCP server to place some options string in Step 1 - Get your V10L working and pulling its config off the central FTP servers wnos.ini file. An example entry into your wnos.ini file. SignOn=yes autoload=1 EnableKeyboardMouseSettings=no SessionConfig=ALL MapDisks=yes DomainList=YOURDOMAIN VDIBroker=https://192.168.1.100/ Timeserver=192.168.12.40 TimeZone='GMT + 10:00' ManualOverride=yes Daylight=yes Start=100107 End=040107 TimeZoneName="AUS Eastern Standard Time" DayLightName="AUS Eastern Daylight Time" Language=Au Step 2 - Add the settings for TCX to your wnos.ini file Put your license code for TCX into the wnos.ini file. If you have multiple separate by a comma. TCXLicense=AAAAA-BBBBB-CCCCC-DDDDD-EEEEE,FFFFF-GGGGG-HHHHH-IIIII-JJJJJ Step 3 - Install the Wyse software into your VM Get the latest extensions from the Wyse website. You then need to install them inside the virtual machine that the terminals will be connected to. You are going to want to make them part of your SOE or template which drives your pools. Step 4 - Test Now you can do your testing to make sure it all works. For multimedia you just need to play video of a supported format. Try it full screen and see if the sound is in sync. You can also look on the log file in your client and you will see an entry showing that decoding has started. Another way to see if video is working if you have dual screens is sit the video across the two screens, you will see that only half the video plays, depending which screen has the greater view of the video. A current limitation is spanning two monitors. To test the USB attach a simple USB device such as a storage device. Again you should see the entries on the clients log showing a new device has been inserted. You virtual machine should report new hardware detected and load the driver or the device will just start working. It does not work. What now? If USB is not working you may need to set the terminal to map through the USB device. Put an entry of "unmapusb=no" into your wnos.ini file. Further reading and helpful links The ThinOS Admin guide has the details of the configuration options, especially for the important ones for the wnos.ini file. The next thing your will want to do is get it working with VDM, see Using the Wyse V10L and S10 Thin Clients with VDM.