caddo's Posts

You can find a tutorial split in severals posts here: http://myvirtualife.net/2013/07/24/understanding-horizon-workspace-components-and-installation-prerequisites/ The gateway-va will make re... See more...
You can find a tutorial split in severals posts here: http://myvirtualife.net/2013/07/24/understanding-horizon-workspace-components-and-installation-prerequisites/ The gateway-va will make redirects to its fqdn all the time unless you install workspace with this in mind and plan name resolution to be the same from all access points.
You can get a full tutorial here: http://myvirtualife.net/2013/07/28/using-a-microsoft-ca-to-generate-certificates-for-horizon-workspace/ http://myvirtualife.net/2013/07/30/how-to-replace-horiz... See more...
You can get a full tutorial here: http://myvirtualife.net/2013/07/28/using-a-microsoft-ca-to-generate-certificates-for-horizon-workspace/ http://myvirtualife.net/2013/07/30/how-to-replace-horizon-workspace-self-signed-certificates-with-microsoft-ca-certificates/
It's a 1.0 version and it's natural for VMware to use a product in their line to start with, but i think they agree with you since in the new 1.5 version they added support for Oracle and i'm sur... See more...
It's a 1.0 version and it's natural for VMware to use a product in their line to start with, but i think they agree with you since in the new 1.5 version they added support for Oracle and i'm sure they will add MSSQL soon enough. The value of this document is that customers can use a virtual appliance to use as DB thus no need to learn much. If you want to see the above document used in practice you can read this blog post: http://myvirtualife.net/2013/07/21/preparing-vpostgres-as-external-database-for-horizon-workspace/, you see it's pretty simple and anyone can do it. In my opinion what they should do is support the Open Source version of PostgreSQL because at least customers will save money on licenses, but i understand this is a bit of a dream What they could actually do is make a specific licensing for supporting DB needed buy VMware products only; for example if you use vPostgres only for deployed VMware products it should be much cheaper.
Hi, i found an error in the script used for the creation of the DB because there is a missing ";" after the command "ALTER ROLE horizon" After adding the missing caracter it works ok.
Removing duplicated totally resolved the problem. As far as i can tell it all looks good now. I will update this thread if things will change. Btw, never got an email from you, don't know w... See more...
Removing duplicated totally resolved the problem. As far as i can tell it all looks good now. I will update this thread if things will change. Btw, never got an email from you, don't know why.
I do have duplicates. I will make the change probably tomorrow and report back to you asap. Thank you.
*PING*
Hi, sorry it took me a couple days but here's the log. You will find i replaced my company email with test01@testdomain.com for privacy reason. Seems like the error is the same i saw i t... See more...
Hi, sorry it took me a couple days but here's the log. You will find i replaced my company email with test01@testdomain.com for privacy reason. Seems like the error is the same i saw i the other logs previously. Thank you.
1) yes i do, on the data-va i get this: 2013-06-14 17:31:14,129 WARN  [qtp2106633145-271:https://172.16.50.204:7071/data/service/admin/soap] [ip=172.16.50.202;] SoapEngine - auth token has expir... See more...
1) yes i do, on the data-va i get this: 2013-06-14 17:31:14,129 WARN  [qtp2106633145-271:https://172.16.50.204:7071/data/service/admin/soap] [ip=172.16.50.202;] SoapEngine - auth token has expired: unable to construct SOAP context 2) nope, fresh default install with one data-va 3) promoted a user to admin, same issue
Sure, the version is 1.0.0-1020976 Here's the screenshot I should add that i've noticed if i unentitle all COS from all groups and wait 1-2 minutes than i can view and modify them. W... See more...
Sure, the version is 1.0.0-1020976 Here's the screenshot I should add that i've noticed if i unentitle all COS from all groups and wait 1-2 minutes than i can view and modify them. When i entitle groups with a COS again i will get the same error... sounds really like a bug.
I made a few test installs of Workspace as evaluation purpuse. Every time i try to entere in the COS of the data service to make changes i can enter maybe one time then from there on there's n... See more...
I made a few test installs of Workspace as evaluation purpuse. Every time i try to entere in the COS of the data service to make changes i can enter maybe one time then from there on there's no way to show, edit or copy the default COS; all i get is the error above. It's a fresh installation, following the manual and most settings are default including ssl certs; i just joined to the domian and configured the connector appliance to collect some thinapp packages. Everything else just works fine and i had no error installing and configuring the vApp. I tried to put this appliance in maintenance mode and back online and also rebooted it but no luck. Anyone had the same problem? Is there a way around it? Thank you!
Thank you for your contribution swica. Anyone else has seen this problem?
I have no doubt, this is why i was trying to find other way other than MDT e SCCM and this is why i decided to stick with present deployment menthod which is linked-clones!
They told me to use MDT or SCCM... but it sounded like a complication instead of a semplification. If this was the only way i would stick with linked-clones, i just wanted to find another way ... See more...
They told me to use MDT or SCCM... but it sounded like a complication instead of a semplification. If this was the only way i would stick with linked-clones, i just wanted to find another way but so far it sounds like it's not worth the fuss.
Obviously falling back to linked-clones is a solution, it's just a shame not to be able to use such a nice feature just because of lack of integration. Thank you all for the help.
I was thinking about doing just that, but i won't be able to preserve the correspondance between VM names in VC and in the guest OS.
I can't use Sysprep in the View Connection Server and i don't think a local use of sysprep could be appropriate. Here's the thing: i have one VM i set up as template, then the storage software... See more...
I can't use Sysprep in the View Connection Server and i don't think a local use of sysprep could be appropriate. Here's the thing: i have one VM i set up as template, then the storage software makes full clones of this template, but they are all identical VMs and i don't know how to customize each guest OS so that they have unique machine name and other IDs. In the end of the procedure i would have to add a manual pool including all these VMs, but i can't use then until i customize them.... suggestions will be appreciated!
Hi all, I am testing  a VSA that comes with a nice fast clone feature but unlike other vendors real storage appliance this feature doesn't seem to integrate with View Manager and I have no way... See more...
Hi all, I am testing  a VSA that comes with a nice fast clone feature but unlike other vendors real storage appliance this feature doesn't seem to integrate with View Manager and I have no way to use quick prep customization options. I think the best option would be to use sysprep (which I don't know very well but it's not a problem to learn) but I would you do this ? It would be nice to have os name the same as the vim name but again I wouldn't know how to do this. Any suggestions on how to use sysprep in this scenario? Or any other method? Thank you.
Hi, this behavior has been observed mainly with Lotus Notes 8.5: when users skip from one email to another they have the body of the email refreshed (meaning they are shown the next email) but... See more...
Hi, this behavior has been observed mainly with Lotus Notes 8.5: when users skip from one email to another they have the body of the email refreshed (meaning they are shown the next email) but sometimes the upper part indicating sender and receiver information is not refreshed. I have read in the past that this behavior can occur with software installed in Windows that uses Java engine for rendering; i remeber that a person had the same problem with a client side of an Oracle ERP and he managed to run the client software with some java.exe flags eventually forcing it to render windows with a different engine. Unfortunately i cannot find reference to that specific problem anymore. The problem doesn't seem to show up if the application written in java is used inside a browser (apparently those use a differend engine for rendering) I was wondering if any of you experience the same problem and how did you work your way around it, if you managed to. Thank you.
Anyone? Really?