Dmitri_Manushin's Posts

Hi, we have Horizon 6 with Windows 7 Ent SP1 64 bit VMs on vSphere 5.5. After 3 months of successful usage Horizon solution we found one issue with Cisco VPN client (IPsec) ver. 5.0.07.0290 32 bit When user connected to some remote location using Cisco VPN client, his connection to VM is lost and when he is trying to reconnect we see VPN client ip@ not VM ip@ from local network and therefore we are not able to connect to VM. We use such configuration for other 5-6 users with the same VPN client, but they doesn't have this problem. Is it possible to restrict Horizon agent to use ip@ from Cisco VPN client and didn't send it to communication sever? may be any other ideas? thank you.

Hi there, we have Horizon 6 and for all components (vCenter, Connection server, composer) we using prod. certificates from internal CA, but on dashboard page in a system health page area connection server RUPAPPVIEW01 marked as red, if I click on it I see next message - Status: Server's certificate is not trusted , SSL Certificate: invalid and there is no button to view certificate where I should click accept or reject. In debug log file I see next error - 2014-08-29T03:27:40.772+04:00 DEBUG (0F14-1380) <SGHealth-federatedtask-1409267524776> [EventLogger] Error_Event:[BROKER_SECURE_GATEWAY_CERT_NOTVALID] "Certificate is invalid for Secure Gateway at address RUPAPPVIEW01": Source=com.vmware.vdi.broker.health.h, Time=Fri Aug 29 03:27:40 MSK 2014, Severity=ERROR, Node=RUPAPPVIEW01.emea.cegedim.grp, Module=Broker, SecurityServerId=RUPAPPVIEW01, Acknowledged=true Certificate with friendly name - vdm is installed and it's valid. How can i fix this? thank you.

Hi There, we just setup our first Horizon 6 platform with Composer manager and connect it to vCenter, then few days later we found out that our composer doesn't work and now we are not able to start service at all, all that we see in event viewer is - A timeout was reached while waiting for the VMware Horizon View composer service to connect. In C:\ProgramData\vmware\viewcomposer\vmware-viewcomposer.log log file i see this messages 2014-07-11 11:41:37,602 | 61        | DEBUG | ServiceCore.LockManager.OperationLockManager - Reader lock has been released. 2014-07-11 11:42:06,868 | 61        | DEBUG | ServiceCore.Security.AuthorizedUsersManager - IsAccessAllowed() returned True for user 'CGDM-EMEA\SA_VMWARECOMP_SVC'. 2014-07-11 11:42:06,899 | 61        | DEBUG | ServiceCore.LockManager.OperationLockManager - Reader lock has been acquired. 2014-07-11 11:42:06,899 | 61        | DEBUG | Sim.ServiceCore.SimServiceApiVal - Call GetAboutInfo. 2014-07-11 11:42:06,899 | 61        | DEBUG | Sim.ServiceCore.SimServiceApiVal - Call GetVersion. 2014-07-11 11:42:06,899 | 61        | DEBUG | ServiceCore.LockManager.OperationLockManager - Reader lock has been released. 2014-07-11 11:42:21,858 | 6         | INFO  | Sim.WebService.SimServer - SVI service shutdown is in progress. 2014-07-11 11:42:21,858 | 6         | DEBUG | ServiceCore.LockManager.OperationLockManager - Writer lock has been acquired. 2014-07-11 11:42:21,858 | 6         | DEBUG | Sim.WebService.SimServer - The SVI service is no longer accepting requests. 2014-07-11 11:42:21,873 | 7         | DEBUG | Sim.WebService.SimServer - Cancelling all outstanding requests. 2014-07-11 11:42:21,873 | 7         | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Shutdown workflow engine. 2014-07-11 11:42:21,873 | WFE thread 3  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 3 2014-07-11 11:42:21,873 | WFE thread 7  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 7 2014-07-11 11:42:21,873 | WFE thread 8  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 8 2014-07-11 11:42:21,873 | WFE thread 19 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 19 2014-07-11 11:42:21,873 | WFE thread 15 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 15 2014-07-11 11:42:21,873 | WFE thread 16 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 16 2014-07-11 11:42:21,873 | WFE thread 11 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 11 2014-07-11 11:42:21,873 | WFE thread 4  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 4 2014-07-11 11:42:21,873 | WFE thread 18 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 18 2014-07-11 11:42:21,873 | WFE thread 1  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 1 2014-07-11 11:42:21,873 | WFE thread 10 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 10 2014-07-11 11:42:21,873 | WFE thread 20 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 20 2014-07-11 11:42:21,873 | WFE thread 17 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 17 2014-07-11 11:42:21,873 | WFE thread 12 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 12 2014-07-11 11:42:21,873 | WFE thread 13 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 13 2014-07-11 11:42:21,873 | WFE thread 14 | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 14 2014-07-11 11:42:21,873 | WFE thread 9  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 9 2014-07-11 11:42:21,873 | WFE thread 6  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 6 2014-07-11 11:42:21,873 | WFE thread 5  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 5 2014-07-11 11:42:21,873 | WFE thread 2  | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - Stop WFE thread 2 2014-07-11 11:42:21,888 | 7         | DEBUG | ServiceCore.WorkflowEngine.WorkflowEngine - The workflow engine is stopped. 2014-07-11 11:42:21,888 | 7         | DEBUG | Sim.WebService.SimServer - Workflow engine shutdown complete. 2014-07-11 11:42:21,888 | 7         | INFO  | CommonLib.UfaSubsystem.UfaSubsystem - UFA subsystem is shutting down. 2014-07-11 11:42:21,888 | 7         | INFO  | CommonLib.UfaSubsystem.UfaSubsystem - UFA main thread pool is shut down. 2014-07-11 11:42:21,888 | 7         | INFO  | CommonLib.UfaSubsystem.UfaSubsystem - UFA aux thread pool is shut down. 2014-07-11 11:42:21,888 | 7         | INFO  | CommonLib.UfaSubsystem.UfaSubsystem - UFA restart reset thread is terminated. 2014-07-11 11:42:21,888 | 7         | DEBUG | Sim.WebService.SimServer - UfaSubsystem shutdown complete. 2014-07-11 11:42:22,013 | 7         | DEBUG | CommonLib.VcSubsystem.FakeVcSubsystem - Shutting down fake VC subsystem with id: 00000000-0000-0000-0000-000000000000 2014-07-11 11:42:22,154 | 7         | DEBUG | CommonLib.VcSubsystem.VcSubsystem25 - Starting shutdown of vc subsystem with vc url https://rupappbkp01.emea.cegedim.grp:443/sdk and user cgdm-emea\sa_vmwareview_svc. 2014-07-11 11:42:22,154 | VC thread | INFO  | CommonLib.VcSubsystem.PropertyCollectorUpdateTracker - CheckTasks is signaled to poll. 2014-07-11 11:42:22,154 | VC thread | INFO  | CommonLib.VcSubsystem.PropertyCollectorUpdateTracker - Shutdown is called. Break from the loop. 2014-07-11 11:42:22,154 | VC thread | INFO  | CommonLib.VcSubsystem.PropertyCollectorUpdateTracker - The VC task update thread exited. 2014-07-11 11:42:22,170 | 7         | INFO  | CommonLib.VcSubsystem.VimClientConnection - Unable either to logout from url: https://rupappbkp01.emea.cegedim.grp:443/sdk with username: cgdm-emea\sa_vmwareview_svc or to dispose the connection. System.Net.WebException: The request was aborted: Could not create SSL/TLS secure channel.    at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)    at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)    at VimApi.InternalVimService.Logout(ManagedObjectReference _this)    at VMware.Sim.CommonLib.VcSubsystem.VimClientConnection.Disconnect() that's all. I've already checked ODBC twice, it's ok. Any idea? thank you!