Liboyer's Posts

Liboyer · ‎07-16-2023

Where was the configuration in the figure configured? I can't find it.

Liboyer · ‎07-09-2023

I am using EVE-NG to build a virtual environment. At present, it is completed, but there is no configuration guide for VCO and VCG, and the official website document only has the configuration metho...

I am using EVE-NG to build a virtual environment. At present, it is completed, but there is no configuration guide for VCO and VCG, and the official website document only has the configuration method of VCO. And I don't have a way to configure multiple VRFS in VCG.

Liboyer · ‎07-08-2023

I can specify overlay traffic to go out from GE3, but I can't guarantee that it can go back from GE3, what can I do? Or how does Velo's DMPO handle this situation? Is there a reference document on th...

I can specify overlay traffic to go out from GE3, but I can't guarantee that it can go back from GE3, what can I do? Or how does Velo's DMPO handle this situation? Is there a reference document on the official website? Thank you very much!

Liboyer · ‎07-07-2023

Why don't I see the gateway here? I open the edge-to-edge tunnel, and the route learning is normal, but after I close the edge-to-edge tunnel, I can't learn the route, but the edge-to-gateway tunnel...

Why don't I see the gateway here? I open the edge-to-edge tunnel, and the route learning is normal, but after I close the edge-to-edge tunnel, I can't learn the route, but the edge-to-gateway tunnel is normal

Liboyer · ‎05-31-2023

Hi,yusukehirata01. Thank you for your reply. Now, my problem is that VCG cannot forward edge traffic. When edge sends packets through the tunnel established by VCG and the packets are sent to VCG, t...

Hi,yusukehirata01. Thank you for your reply. Now, my problem is that VCG cannot forward edge traffic. When edge sends packets through the tunnel established by VCG and the packets are sent to VCG, the VCG directly forwards the packets to the directly connected router (the packets are original packets without tunnel encapsulation), so the router does not know how to reach the private IP address of edge. The router discards the packet. Please refer to my topology and router packet forwarding result. When I built my own tunnel from edge to edge, communication was normal. When I built my own tunnel from edge to edge, communication was normal.

Liboyer · ‎05-31-2023

Thank you for your reply. Now, my problem is that VCG cannot forward edge traffic. When edge sends packets through the tunnel established by VCG and the packets are sent to VCG, the VCG directly for...

Thank you for your reply. Now, my problem is that VCG cannot forward edge traffic. When edge sends packets through the tunnel established by VCG and the packets are sent to VCG, the VCG directly forwards the packets to the directly connected router (the packets are original packets without tunnel encapsulation), so the router does not know how to reach the private IP address of edge. The router discards the packet. Please refer to my topology and router packet forwarding result. When I built my own tunnel from edge to edge, communication was normal. When I built my own tunnel from edge to edge, communication was normal.

Liboyer · ‎05-30-2023

My VCE can establish a connection through the edge to edge tunnel and learn the other party's route, but VCG cannot learn the route, VCG is normal，And in the configuration, I cannot see the VCG optio...

My VCE can establish a connection through the edge to edge tunnel and learn the other party's route, but VCG cannot learn the route, VCG is normal，And in the configuration, I cannot see the VCG options for edge and cannot assign VCG to edge Velo version is 4.3, simulated through EVE-NG

All

Liboyer's Posts

VCG Gateway configuration problem

where have VeloCloud VCG and VCO Deployment Guide ?

How does the DMPO confirm the traffic return path?

Why don't I see the gateway here?

Re: VCG cannot learn routing

Re: VCG cannot learn routing

VCG cannot learn routing