Advertising into the overlay means a route that is locally learnt on an edge will be sent to the Velo gateway which then reflects it to all other edges in the enterprise (based on the config) One ex...
See more...
Advertising into the overlay means a route that is locally learnt on an edge will be sent to the Velo gateway which then reflects it to all other edges in the enterprise (based on the config) One example - Say we configure a static default route on a hub pointing to some LAN side interface. Now when this route is advertised to the overlay, all other edges that receive this route will install the route in their FIB and the next hop will point to the hub
Having a L2 switch between the HA pair is fine as long as there is no latency induced. We have strict latency requirements in HA. We exchange heartbeats every 100ms and we failover if we miss 7 heart...
See more...
Having a L2 switch between the HA pair is fine as long as there is no latency induced. We have strict latency requirements in HA. We exchange heartbeats every 100ms and we failover if we miss 7 heartbeats. Any latency that might get induced due to a L2 switch in between might incorrectly induce a failover.
