Good Afternoon, WE are running Velocloud Edge 610s. We have Cisco APs in our environment and as such we need to use DHCP option 43 to point the APs at the Wireless Controller. Can someone point m...
See more...
Good Afternoon, WE are running Velocloud Edge 610s. We have Cisco APs in our environment and as such we need to use DHCP option 43 to point the APs at the Wireless Controller. Can someone point me to documentation or show me an example of how to configure DHCP option 43 on a Velo vlan for a Cisco wireless access point? This is easy on the old Cisco routers we are migrating from. Just not been able to get working on Velo as of yet.. Thanks So Much!
Greetings!, We are running into a interesting situation. We are rolling our VeloCloud Edge 610s to over 500 locations. These locations have 10 VLANs/Subnets with subnets sizes from /26 to /30s. W...
See more...
Greetings!, We are running into a interesting situation. We are rolling our VeloCloud Edge 610s to over 500 locations. These locations have 10 VLANs/Subnets with subnets sizes from /26 to /30s. We have a Edge 3800s is a cluster in our data center. All Edges are on version 4.3.1. Our issue is the number of routes that we are receiving is crushing our router in the data center. We have come up with remedies to address this on the routers but is messy.. My question is can the Velo Edge 3800 summarize the BGP routes? Example: Site 42 VLAN 5 10.2.x.0/28 vlan 10 10.2.0.16/28 vlan 15 10.2.0.32/27 So all these routes as expected come into our data center.. Can we configure the Edge 3800 to summarize all the 10.2.x.x to a 10.2.0.0/24 so that way we only get 1 route redistributed rather than in our case 10 subnets for each site?
