All Posts

khirom · ‎08-08-2022

I don't have the answer. What about clustering with Velocloud Virtual Appliance on Azure? https://youtu.be/n6sYpxinHPg

YuriiP · ‎08-07-2022

Thank you Priya. It is clear now.

YuriiP · ‎08-07-2022

Hi Aakash, Yes, we saw this property, but for some reason it always equals "00:00:00:00:00:00". We have two edge620 and the behavior is similar. Can it be related to some misconfiguration on these...

Hi Aakash, Yes, we saw this property, but for some reason it always equals "00:00:00:00:00:00". We have two edge620 and the behavior is similar. Can it be related to some misconfiguration on these devices? Regards, Yuriy

priyamurthy · ‎08-05-2022

The ifindex displayed by both OIDs is expected to match and SNMP request is served by snmpd. Could you let us know the version of snmpd that you are running? Thank you, Priya

bademoo · ‎08-03-2022

Thanks for the answer

priyamurthy · ‎08-03-2022

I also wish to confirm what do you mean by " removing/re-adding edge" ? If you are referring to the Delete edge ("edge/deleteEdge") operation, no properties would remain the same.

vkamath89 · ‎08-03-2022

Hello! BGP Route summarization functionality is available from release 5.1

vkamath89 · ‎08-03-2022

Advertising into the overlay means a route that is locally learnt on an edge will be sent to the Velo gateway which then reflects it to all other edges in the enterprise (based on the config) One ex...

Advertising into the overlay means a route that is locally learnt on an edge will be sent to the Velo gateway which then reflects it to all other edges in the enterprise (based on the config) One example - Say we configure a static default route on a hub pointing to some LAN side interface. Now when this route is advertised to the overlay, all other edges that receive this route will install the route in their FIB and the next hop will point to the hub

vkamath89 · ‎08-03-2022

Having a L2 switch between the HA pair is fine as long as there is no latency induced. We have strict latency requirements in HA. We exchange heartbeats every 100ms and we failover if we miss 7 heart...

Having a L2 switch between the HA pair is fine as long as there is no latency induced. We have strict latency requirements in HA. We exchange heartbeats every 100ms and we failover if we miss 7 heartbeats. Any latency that might get induced due to a L2 switch in between might incorrectly induce a failover.

priyamurthy · ‎08-03-2022

Hi vkokodyn, For this query, I have reached out to subject matter experts in our team. Will get back to you as soon as we have a response. Thank you, Priya

priyamurthy · ‎08-03-2022

Hi Yuriy, Both the edge "id" and "logicalId" are unique for an edge. Thank you, Priya

awadhwani · ‎08-03-2022

Hi Yurii, You could get macAddress for an edge using API "edge/getEdge", the attribute name is `selfMacAddress` Thanks, Aakash

YuriiP · ‎08-01-2022

Hi Community, We are working with VMware API and need to find out which of edge's identifiers ("id", "deviceId" and "logicalId") stays constant even after removing/re-adding edge. Regards, Yuriy

vkokodyn · ‎07-25-2022

Hi everyone, I poll IP addresses and Interfaces for VeloCloud EDGE6X0 device via SNMP OIDs 1.3.6.1.2.1.4.20.1 and 1.3.6.1.2.1.2.2 in accordance. For example, ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2)...

Hi everyone, I poll IP addresses and Interfaces for VeloCloud EDGE6X0 device via SNMP OIDs 1.3.6.1.2.1.4.20.1 and 1.3.6.1.2.1.2.2 in accordance. For example, ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2) returns the following values 2, 1, 18, 20, 17, 16 and ifIndex (1.3.6.1.2.1.2.2.1) returns 16777218, 16777219, 16777220, 16777221, 16777222, 16777223, 16777224, 16777225. How can I map IP address with Interface by ifIndex, if it is completely different? Is there any other SNMP OIDs I could use? Please advice.

YuriiP · ‎07-19-2022

Hi Community, Is there a reliable way to get the list of MAC addresses from VeloCloud API similarly available via SNMP OID - 1.3.6.1.2.1.2.2.1.6? Tried /enterprise/getEnterpriseEdges and some other...

Hi Community, Is there a reliable way to get the list of MAC addresses from VeloCloud API similarly available via SNMP OID - 1.3.6.1.2.1.2.2.1.6? Tried /enterprise/getEnterpriseEdges and some others endpoints, but no luck. Please advice. Yurii

sdwannew13 · ‎06-30-2022

Hello Marco thank you for your answer but my question is pretty basic what is the meaning of advertising default route on sdwan device? Does it mean that spoke's default route will point to hub? And...

Hello Marco thank you for your answer but my question is pretty basic what is the meaning of advertising default route on sdwan device? Does it mean that spoke's default route will point to hub? And that default route is injected by hub by advertising it to spoke?

pabloivan4 · ‎06-29-2022

Hi everyone, we have a Velocloud Virtual Appliance in our Azure cloud. We wonder if it's possible to create an appliance backup using the Azure Backup system for VMs. I appreciate any help you can p...

Hi everyone, we have a Velocloud Virtual Appliance in our Azure cloud. We wonder if it's possible to create an appliance backup using the Azure Backup system for VMs. I appreciate any help you can provide.

avgvizoso · ‎06-28-2022

Greetings! I don't know if it's exactly what you need but in this manual, at the bottom of the page, you can see info about Route Summarization. https://docs.vmware.com/en/VMware-SD-WAN/5.0/VMware...

Greetings! I don't know if it's exactly what you need but in this manual, at the bottom of the page, you can see info about Route Summarization. https://docs.vmware.com/en/VMware-SD-WAN/5.0/VMware-SD-WAN-Administration-Guide/GUID-589D3693-3252-4895-919F-5FA1D79D9E1F.html?hWord=N4IghgNiBcIEoHsCuAXApgAgMpILa7ACcBLALzBWIQDsQBfIA

like2_143 · ‎06-28-2022

@marcoh2019Thanks for your response. Yes, the Edge has internet access and is also reachable to VCO and VCF after being powered on. As I mentioned, needed to reactivate the vEdge after powered on. S...

@marcoh2019Thanks for your response. Yes, the Edge has internet access and is also reachable to VCO and VCF after being powered on. As I mentioned, needed to reactivate the vEdge after powered on. Someone suggested me to disable the Cloud-init once the edge is activated but i don't know to disable it and also i am not sure this will resolve my issue.

scott28tt · ‎06-27-2022

Your thread has been reported to moderators, it needs moving since it is not about a vSphere security advisory.

All

All Posts

Re: Is the Velocloud Virtual appliance in Azure compatible with Azure Backup.

Re: [VeloCloud] Which edge identifier is constant in API?

Re: [VeloCloud] How to get Edge's MAC addresses via API

Re: How to map IP addresses with Interfaces by ifIndex

Re: VeloCloud HA

Re: [VeloCloud] Which edge identifier is constant in API?

Re: VeloCloud BGP Summarization

Re: default route advertised into the Overlay

Re: VeloCloud HA

Re: How to map IP addresses with Interfaces by ifIndex

Re: [VeloCloud] Which edge identifier is constant in API?

Re: [VeloCloud] How to get Edge's MAC addresses via API

[VeloCloud] Which edge identifier is constant in API?

How to map IP addresses with Interfaces by ifIndex

[VeloCloud] How to get Edge's MAC addresses via API

Re: default route advertised into the Overlay

Is the Velocloud Virtual appliance in Azure compatible with Azure Backup.

Re: VeloCloud BGP Summarization

Re: The vEdge on KVM (EVE-NG) lost configuration or unable to communicate with VCO after the Shutdow

Re: Need bug id and url for velocloud Interface error issue