Matthiasvdc's Posts

Re: VMWare workstation 16.1 on Windows 10 Pro 20H2 -> Network bridge problems

by Contributor in VMware Workstation Pro Discussions
‎12-02-2020 06:57 AM
‎12-02-2020 06:57 AM
I've found out wat caused these problems. To summarize it: using VLAN's and creating bridged network interfaces for it in VMWare workstation doesn't permit encrypted traffic (HTPPS, SSH, RDP, ...). ... See more...
I've found out wat caused these problems. To summarize it: using VLAN's and creating bridged network interfaces for it in VMWare workstation doesn't permit encrypted traffic (HTPPS, SSH, RDP, ...). What did I do to track down the problem: boot up older computers with Windows 10 1909 and Workstation 15. -> Everything worked. So I upgraded Windows 10 to 20H2 and VMWare workstation to 16.10 -> Everything still worked. Then I started thinking: what's the only difference left between those old computers and the new ones??? -> The network adapter, the new ones had onboard RealTek adapters and the old ones had Intel adapters. I added a PCIe X4 Intel adapter to one of the new computers and disabled the RealTek adapter in the bios. Everything works perfectly now. So huge warning: watch out with RealTek adapters and VMWare workstation!!!

Re: VMWare workstation 16.1 on Windows 10 Pro 20H2 -> Network bridge problems

by Contributor in VMware Workstation Pro Discussions
‎12-02-2020 06:51 AM
‎12-02-2020 06:51 AM
Yes, that's not the cause of the problem.

VMWare workstation 16.1 on Windows 10 Pro 20H2 -> Network bridge problems

by Contributor in VMware Workstation Pro Discussions
‎12-01-2020 07:12 AM
‎12-01-2020 07:12 AM
Hello, I just installed 2 new computers they are running Windows 10 Pro version 20H2. We're using VLANs here: 101, 102 and untagged. The host has a virtual network adapter for each VLAN. Then I in... See more...
Hello, I just installed 2 new computers they are running Windows 10 Pro version 20H2. We're using VLANs here: 101, 102 and untagged. The host has a virtual network adapter for each VLAN. Then I installed VMWare Workstation 16.1.0 build 17198959. The SSD's were transferred from the old computer (Workstation 15.5 and Windows 10 Pro 1909). In the "Virtual Network Editor" 3 VMNet's were added and then bridged to the corresponding virtual network adapters. Now in the virtual machines, I can only ping IP's. Doesn't matter where they are located: internal, external, ... Also resolving DNS records is fine, tracert command works also. What doesn't work is surfing, Microsoft Remote Desktop, ... All this is setup identically to our other computers. Is there a compatibility issue with the newest Windows 10 Pro and Workstation? If you need any other information, please ask.
Labels