Martyndwn's Posts

Re: Communicate between two VMs on one host

by Contributor in VMware Workstation Pro Discussions
‎10-24-2022 02:40 AM
‎10-24-2022 02:40 AM
Thank you so much Thats works great.  

Re: Communicate between two VMs on one host

by Contributor in VMware Workstation Pro Discussions
‎10-24-2022 12:46 AM
‎10-24-2022 12:46 AM
Hi,   The ipconfig/all are in the attached   Thank you

Re: Communicate between two VMs on one host

by Contributor in VMware Workstation Pro Discussions
‎10-22-2022 02:20 PM
‎10-22-2022 02:20 PM
Hi, VM1 - IP address is static - 192.168.0.2 Subnet - 255.255.255.0 VM2 - IP address is static - 192.168.0.3 Subnet - 255.255.255.0 Host - IP address is static - 192.168.0.1 Subnet - 255.255.255.0... See more...
Hi, VM1 - IP address is static - 192.168.0.2 Subnet - 255.255.255.0 VM2 - IP address is static - 192.168.0.3 Subnet - 255.255.255.0 Host - IP address is static - 192.168.0.1 Subnet - 255.255.255.0 I have tried setting  VM network adapters to Bridged ( automatic) & custom (vmnet0), which is set to my USB network adapter. Thank you for your help.  

Communicate between two VMs on one host

by Contributor in VMware Workstation Pro Discussions
‎10-22-2022 01:37 PM
‎10-22-2022 01:37 PM
Hi, I am trying to communicate between two Windows 10 VMs on a Windows 10 laptop with Workstation Pro. I can only ever ping one of the VMs if I have two of them running, I cannot ping from VM-VM or... See more...
Hi, I am trying to communicate between two Windows 10 VMs on a Windows 10 laptop with Workstation Pro. I can only ever ping one of the VMs if I have two of them running, I cannot ping from VM-VM or from both VMs to the host, I have to shut one of them down. I am sure I have done this successfully before on a Macbook using Fusion. can anyone offer any advice on this? Thank you      

Re: VMWARE Workstation Pro 16 Network Issues

by Contributor in VMware Workstation Pro Discussions
‎06-24-2022 09:37 AM
‎06-24-2022 09:37 AM
Hi, When the USB-C adapter is plugged into the network, it shows up in the dropdown menu.   I have selected this with vmnet0, the connection drops out occasionally, but with this selected I do not... See more...
Hi, When the USB-C adapter is plugged into the network, it shows up in the dropdown menu.   I have selected this with vmnet0, the connection drops out occasionally, but with this selected I do not have to restart the VM andreset the defaults, it connects automatically. You've been a great help, thank you very much.

Re: VMWARE Workstation Pro 16 Network Issues

by Contributor in VMware Workstation Pro Discussions
‎06-22-2022 01:07 PM
‎06-22-2022 01:07 PM
Is the wifi 6 device the laptop wifi adapter and used to connect via ethernet? If so then yes.   Regards

Re: VMWARE Workstation Pro 16 Network Issues

by Contributor in VMware Workstation Pro Discussions
‎06-22-2022 12:27 PM
‎06-22-2022 12:27 PM
The attached shows the options.   I have the USB-C adapter plugged in, but it is not connected to a network.   Thank you

Re: VMWARE Workstation Pro 16 Network Issues

by Contributor in VMware Workstation Pro Discussions
‎06-22-2022 12:04 PM
‎06-22-2022 12:04 PM
Thank you, How do I do that? in the drop down menu to bridge to there is only automatic, wifi and bluetooth. Regards    

VMWARE Workstation Pro 16 Network Issues

by Contributor in VMware Workstation Pro Discussions
‎06-22-2022 10:42 AM
‎06-22-2022 10:42 AM
Hi, I am running a Windows 10 VM on a Windows 10 host PC for PLC programming. I communicate to the PLC network through a USB-C to ethernet adapter. Occasionally, the communications drop out, if this... See more...
Hi, I am running a Windows 10 VM on a Windows 10 host PC for PLC programming. I communicate to the PLC network through a USB-C to ethernet adapter. Occasionally, the communications drop out, if this happens the only way I can re-establish comms, is to shutdown the VM and restore defaults in the virtual network editor, as this can happens a few times each day, it can be very frustrating. When this happens I cannot ping the host either, until the defaults are restored and the VM re-started. I am using the bridged connection in the VM. Can anyone help with this?   Thank you      

VMware workstation pro 16 slow after inactivity

by Contributor in VMware Workstation Pro Discussions
‎04-08-2022 08:10 AM
‎04-08-2022 08:10 AM
I have Dell Precision 5560 64gb Ram, that I use to run a windows 7 VM. After a period of inactivity, the vm is extremely slow, it gets to the point that it has to be restarted. Minimising and maximis... See more...
I have Dell Precision 5560 64gb Ram, that I use to run a windows 7 VM. After a period of inactivity, the vm is extremely slow, it gets to the point that it has to be restarted. Minimising and maximising a running application can take several seconds, with it gradually appearing. Clicking with the mouse can again take a long time before there is any response. Any ideas what is causing this?