sh020f
Contributor
Contributor
‎05-26-2023 07:11 AM

VRRP VIP not able to ping from customer LAN switch (cisco miraki)

Hello Team ,

 

The VRRP is on the LAN segment which allow customer to connect to active VRRP router all the time. The VRRP is between the VCE and AVPN only on the segment which face customer switch. VRRP VIP is not able to ping from customer LAN switch.

 

Kindly give me the solution.

Reply
0 Kudos
RBNetEngr
Contributor
Contributor
‎07-10-2023 10:52 AM

https://docs.vmware.com/en/VMware-SD-WAN/5.2/VMware-SD-WAN-Administration-Guide/GUID-AA2A434D-A249-4...

The link above describes how to set up VRRP, as well as some of the conditions for it to work.

But for the description of problem you describe, it sounds like an issue with ARP, and that the switch is not able to get the correct MAC address for the VRRP VIP, so it will not be able to ping it.  Did you check the ARP table to see what the value of the MAC address associated with the VRRP VIP is?

Also, have you verified that VRRP is operating between the VCE and the AVPN router?

Reply
0 Kudos