- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Are you using a stripped RAID array connected to your
SAS controller?
http://www.planetamd64.com/lofiversion/index.php/t9600
.html
You probably need to install nf4 drivers during PnP
Hardware detection.
But can't find an explanation why it works when
installed from CD media and not when installed from
UDA. it looks like controller order detection isn't
the same when booted from CD or PXE booted.
Have you compared boot.ini ARC path from both OS
install?
I believe that was the trick. i used nlite to add the nf4 drivers to the PNP driver set, and recreated the disk. I can now get that slipstream image to install my SUN Ultra 40's and Galaxy 4200's. I'm going to push that image to UDA and see what it does.
I greatly appreciate your help, not only will this save me some time as now I can give this CD to my hardware guys and I don't have to build every server manually myself, but I learned a lot about Windows during this which won't hurt the resume ![]()
Now to get UDA to do the install!!