- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi thanks for the information
I think I have a different problem, I've used EDA to deploy an esx 3.5 box all worked fine ... But I cannot see the SAN,,, have a look at the attach images hence looking at the drivers and loaded modules etc
I've used vmkload_mod -l
Name R/O Addr Length R/W Addr Length ID Loaded
qla2300_707_vmw 0x8b2000 0x59000 0x28c8300 0xac000 4 Yes
looking at other ESX 3.02 boxes I see /proc/scsi/qla2300 which is correct,,,, But on the ESX 3.5 box ONLY /proc/scsi/ ,,,, Don't know what's happening
The VC for ESX 3.02 see image "With SAM.bmp" is fine.... but using the ESX 3.5 see image "NO SAN.bmp" there's no SAN
Do you have any advise , useful commands
Thanks