><![if gte mso 9]>
/* Font Definitions */
panose-1:2 4 5 3 5 4 6 3 2 4;
mso-font-signature:0 0 0 0 0 0;}
panose-1:2 15 5 2 2 2 4 3 2 4;
mso-font-signature:-1610611985 1073750139 0 0 159 0;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
mso-bidi-font-family:"Times New Roman";}
When I tried to install the VMware Tools on
x64 Windows Server 2003 SP2 , the following error was logged in the event logs and the
VMware Tools failed to installed properly:
“Product: VMware Tools – Error 1722. There is a problem with
this Windows Installer packager. A program run as part of the setup did not
finish as expected. Contact your support personnel or package vendor. Action
C:\WINDOWS\Installer\MSI67.temp, command: -register “C:\Program Files
(x86)\VMware\VMWare Tools\Drivers\vcc\VCBSnapshotProvider.dll” “VMware Snapshot
Provider” “vmvss” “VMware Snapshot Provider””
ESX/VC 3.5 Update 2 is the version that I am running. I never encountered such an issue before the upgrade.
Kindly let me know the cause of this error.
The Distribution Transaction Coordinator service was set to Automatic, but failed to start with error code -1073737712.
In short: "msdtc -resetlog". Afterwards the problem went away.
Do make sure you stop anything that might be using the log, any databases, applications, whatever.
I had converted two physical servers that were originally in a cluster into VMware ESX 3.5 and ran into the error 1722 when trying to install VM Tools. The install would only fail when the Volume Shadow Copy Services Support option was selected to be installed under VMware Device Drivers. I believe this option requires the Distributed Transaction Coordinator service (MSDTC) to be running for the install to complete. I couldn't get MSDTC to start so I needed to remove the old cluster installation first because MSDTC was installed in the cluster.
The following is what resolved my problem with the error 1722:
Remove old cluster installation:
cluster /cluster:(cluster name) node (node name) /force
Install MSDTC and start the service:
net start msdtc
Install VM Tools with no more errors
I hope this helps...
I get a error whwn install vCenter server on windwos 2008
Product: VMware vCenter Server -- Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action VM_InstallJre, location: C:\Windows\Installer\MSIEDED.tmp, command: /S /INSTALLDIR=C:\Program Files\VMware\Infrastructure\jre\
anyone can help?
In my case, the error 1722 on installation of VMware Tools was caused by Windows Management Instrumentation service that was stopped and disabled.
Setting it to Automatic and start I solved and installed VMware Tools successfully.
IN my case the error was caused by the not having network DTC access enabled.
Steps to enable network DTC access
Control Panel, and then click Add or Remove
Server, and then click
Select Enable network DTC access, and
then click OK.
Jason D. Langdon
i had the same Problem. Nothing from the above was solving the Problem.
This worked for me:
Registering the DLL manually ends with error 0x80070005.
regsvr32 "C:\Program Files\VMware\VMware Tools\Drivers\vss\VCBRequestor.dll"
regsvr32 "C:\Program Files\VMware\VMware Tools\Drivers\vss\VCBSnapshotProvider.dll"
This an Permission-Problem. Check Registry HKEY_CLASSES_ROOT\VCBRequestor.VmVssRequestor / HKEY_CLASSES_ROOT\VCBSnapshotProvider.VmSnapshotProvider and delete them.
If you cannot delete, change Userrights.
After that, try to register the DLL´s and re-run comreg.
"C:\Program Files\VMware\VMware Tools\COMREG.EXE" -register "C:\Program Files\VMware\VMware Tools\Drivers\vss\VCBSnapshotProvider.dll" "VMware Snapshot Provider" "vmvss" "VMware Snapshot Provider"
Please give a Feedback!