Hi guys,
I have a problem with a FC card. One vmhba is offline and configured as LPORT. But in Qlogic Bios Utility all vmhba are configured in "point to point".
I didn't find anything else on the ESXi configuration about this issue. Someone have an idea ?
This card is a DualPort on HP Blade. The vmhba2 works fine but not vmhba1
# esxcli storage san fc list
Adapter : vmhba1
DriverName : qlnativefc
....
PortState : LINK DOWN
PortType : LPORT
Adapter : vmhba2
DriverName : qlnativefc
....
PortState : ONLINE
PortType : NPORT
Thank you,
Did you tried to swap the cable between the vmhba1 and vmhba2 to see if the problem still happen on vmhba1 or if it moves to vmhba2? Also, the FC port type on physical switch are configured with the same settings? Are you using Brocade switches?
Hi,
I can't change port type on the switch but I see "Loop" as type port. And yes, it's a HP switch Brocade.
Thank you,
regards,