Dear Alls ,
My server is HP Dl380G10 run ESXI on HP custom ESX6.5.0 (Build 5310538) but i can't see
(HP 530SFP+) Broadcom NetXtreme II BCM57810 10 Gigabit on NICs
I follow with 'VMware Compatibility Guide - I/O Device Search ' success for install but still not see NICS on ESXI
When i used CLI 'lspci -v | grep -A1 -i ethernet' it show as below.
000:11:00.1 Ethernet controller Network controller: QLogic Inc. QLogic 57810 10 Gigabit Ethernet Adapter [vmnic9]
Class 0200: 14e4:168e
--
0000:b2:00.0 Ethernet controller Network controller: Intel Corporation Ethernet 1Gb 4-port 366FLR Adapter [vmnic4]
Class 0200: 8086:1521
How i can install correct driver ? Anybody can help me will best
Regards
Bancha
Do you have a firmware version listed on the HCL? Does the driver correspond to that firmware?
Dear Sir
Do you have a firmware version listed on the HCL? >> How i can know firmware on HCL?
You just look at it. Use the link you yourself included in your first email. It shows you the firmware version and the corresponding driver.
I used
bnx2x version 2.713.30.v60.9 but not work. Regard |
Paste the output of vsish -e get /net/pNics/vmnicN/properties | grep Driver where vmnicN is the number representing the vmnic backed by that adapter.
Sir
i saw interface on passthrough interface and i select it and reboot on ESX
So i look on 'network adapter' still not have appear.
But now it nightmare i try edit VM and select add new PCI that hope passthough nic will can use on VM but when i power VM My ESX is lost. and not ping.
Any ideas?
I'm sorry but I don't understand what you're trying to say.
Sir
I saw
So when i select that nic ( Hope it will show on 'Network Adapter') and Reboot ESX but it still not show NIC on Network adapter.
After that i edit VM and add PCI (That have name of card that i try install driver) after i power on ESX HOST Down!!
and now i lost connection on remote ESX manage ip.
Any idea ?