Hi,
i installed a new SSD on my server PowerEdge R920, it is detected by the controller, but in my ESXi 6.5 i don't see it.
I sax that there are some articles on this subject like:
But the problem is that when i run the below command, the SSD is not on the list:
esxcli storage nmp device list
Do I have a little hope?
Thanks for any help.
what ssd
You have to create a RAID0 with your single SSD or you have a PERC which is configurated in the Passthrough Mode and not RAID.
Regards,
Joerg
Hi,
i created a RAID0 with only my SSD, but it still doesn't detected :smileyplain:
Please try using:
esxcli storage device list
When doing
esxcli storage nmp device list
what you do is list all devices that use nmp multipath plugin
Hi,
this is the result for esxcli storage nmp device list command:
[root@win-sgo4ofqpprp-1:~] esxcli storage nmp device list
mpx.vmhba0:C0:T2:L0
Device Display Name: Local HL-DT-ST CD-ROM (mpx.vmhba0:C0:T2:L0)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba0:C0:T2:L0;current=vmhba0:C0:T2:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba0:C0:T2:L0
Is USB: false
naa.6b083fe0ca0068002706da0c0c3b0581
Device Display Name: Local DELL Disk (naa.6b083fe0ca0068002706da0c0c3b0581)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba1:C2:T2:L0;current=vmhba1:C2:T2:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba1:C2:T2:L0
Is USB: false
t10.NVMe____Dell_Express_Flash_NVMe_P4610_1.6TB_SFF_00019A25C3E4D25C
Device Display Name: Local NVMe Disk (t10.NVMe____Dell_Express_Flash_NVMe_P4610_1.6TB_SFF_00019A25C3E4D25C)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba2:C0:T0:L0;current=vmhba2:C0:T0:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba2:C0:T0:L0
Is USB: false
naa.6b083fe0ca00680027084df50d8f2ead
Device Display Name: Local DELL Disk (naa.6b083fe0ca00680027084df50d8f2ead)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba1:C2:T3:L0;current=vmhba1:C2:T3:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba1:C2:T3:L0
Is USB: false
naa.6b083fe0ca0068002704614a63083366
Device Display Name: Local DELL Disk (naa.6b083fe0ca0068002704614a63083366)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba1:C2:T1:L0;current=vmhba1:C2:T1:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba1:C2:T1:L0
Is USB: false
naa.6b083fe0ca00680026f38ec403a05108
Device Display Name: Local DELL Disk (naa.6b083fe0ca00680026f38ec403a05108)
Storage Array Type: VMW_SATP_LOCAL
Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.
Path Selection Policy: VMW_PSP_FIXED
Path Selection Policy Device Config: {preferred=vmhba1:C2:T0:L0;current=vmhba1:C2:T0:L0}
Path Selection Policy Device Custom Config:
Working Paths: vmhba1:C2:T0:L0
Is USB: false
Thanks for your help
i created a RAID0 with only my SSD, but it still doesn't detected
Did you also create a logical volume (VD) on the RAID? It's not the RAID itself which is presented to the operating system, but the VD.
André
What ssd we are looking for?
It's a Dell 1.6TB PM1645, Samsung Part Number: MZ-ILT3T80