Unable to determine path: Unable to determine router for Gateway IP 10.10.40.1

[npavlov]

Hi guys!

I've successfully installed and integrated VRNI 4.0 with my vSphere 6.7 and NSX 6.4.4

But i have one little issue - VM Path Topology doesnt't work correctly for VMs which are located at regular (non-NSX) Port Groups

For example Path to Internet throws the following error 'Unable to determine path: Unable to determine router for Gateway IP 10.10.40.1'

10.10.40.1 is the gateway (SVI) on a physical switch

The same thing with a VM on NSX network works just fine

[karthickvm]

Hello npavov,

We get routing information from NSX controller for NSX logical switches but for Non-NSX PGs, physical switches must be added as data sources in vRNI,

Once you add supported physical switch to vRNI, it will start showing the path.

[Dan_Kahl]

Hi npavlov -

I had this problem as well and it was resolved when I added the physical routers and switches to vRNI.  Go to Settings --> Add Source, and add the router/switch in for discovery.

Dan