Physical adapter networks

[FireIT]

I have two 10GB network adapters setup on on vswitch.  These are connected to trunk ports on the physical switch.  I am trying to bring a new VLAN into the environment but the way I am looking at things the new VLAN is not available.   

Here is the information from the adapter.

Status
Status	Connected
Actual speed, Duplex	10 Gbit/s, Full Duplex
Configured speed, Duplex	10 Gbit/s, Full Duplex
Networks	10.30.1.1-10.30.1.127 ( VLAN100 ) 10.30.5.128-10.30.5.191 ( VLAN5 ) 0.0.0.1-255.255.255.254 ( VLAN2500 ) 0.0.0.1-255.255.255.254 ( VLAN700 )

I am trying to bring in VLAN 702 which is on the list of vlans in the switch configuration.  

My question is how are these networks (VLANS) assigned to this physical adapter , how do I edit this information?

Thanks

[D_G_Tal]

at first you must pass VLAN on physical switch.

and then add port group on Vswitch and tag a VLAN for that.