Error for VS installing

[hartball38]

Dear :

I try to install vsa on vCenter,but something worng so that i can finish the install.

beacuse it show error on vsa1 host in the process of "select  host  "

as the link :

http://dl.dropbox.com/u/16503603/Q3_E.pdf

How shuld I slove it?

If  I do use VLAN ,SHOULD I set the VLAN for those?

THX!

[Sreejesh_D]

Issue 1 : the error in VSA1 host

Looks like the error in VSA1 host is due to the Letter Case in switch name VSA-VMotion. Please make sure the letters marked in red are in CAPITAL letters, ie,  VSA_VMotion.

Issue 2 : warnings in VSA1 and VSA2.

Please make sure vSwitch0 has both the Uplinks LIVE. ie vmnic0 and vmni2 are connected.

[rpotru]

Can you post the error that you are seeing while selecting the host during deploy?

Agree with yezdi. vMotion networking label should be same. I beleive it should solve your issue. VLAN does not correlate to the error.

[hartball38]

Dear yezdi:

Thx your help,

I fix the ltetter VSA-VMotion ,the error was sloved.

But,No there is another error  during my installing procss.

http://dl.dropbox.com/u/16503603/q4_e.pdf

I change my ip 192.168.50.80 to 192.168.100.90 for all period.

Q1.Where does the subnet ip :192.168.100.0 come from ?

Becase ,iI show error when I want to  install the VSA .

I am sure my vCenter and Host had correct ip,subnet mask,getway....

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=200483...

another info:

http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsa.doc_10%2FGUID-1F1A4FFF-D6A8-4FB1...

It saied that can't use 192.168.X.X private IP? Is it Sure?

Q2.IF I don’t use DHCP ,can I set the vSphere Feature ID address ,and Back-end ip Address by myself?

And doe’t use VLAN ID ,if I don’t have it?

Q3. one Host has 4 port for uplink.

now  ,I just uplink as below:

vmnic0  --UPLINK

vmnic2

-------

vmnic1  --UPLINK

vmnic3

Now i had change the uplink as: TYPE1

vmnic0  --UPLINK

vmnic2  --UPLINK

-------

vmnic1

vmnic3

----------------------------------------OR TYPE2

vmnic0  --UPLINK

vmnic2  --UPLINK

-------

vmnic1--UPLINK

vmnic3

[hartball38]

dear yezdi：

finally ,i found the soluation in my case as:

cannot createvsa cluster:cluster's subnet 192.168.100.0 is invalid,shoud not be 192.168.100.0

I use the same ip range in the BACK-END IP ADDRESS.

if I use 192.168.100.XXX

then my BACK-END IP ADDRESS can be any 192.168.XXX.XXX ,jsut not 192.168.100.XXX

WHY?

THX!