Hi All,
I cannot invoke VCSA HA at all, and get the error message below:
The operation is not allowed in the current state. Failed to get management network information. Verify if management interface (NIC0) is configured correctly and is reachable.
I have done the following:
1. Made sure the VCSA name is in lower case (fixed it with a previous query);
2. Made sure the Forward/Reverse lookup zones in DNS reflect the correct details of the VCSA (also all in lower case), and verified I can resolve the name via nslookup;
3. Created a standard port on a separate vSwitch for the VCSA HA network on all hosts (same name);
4. Added a second NIC to the current active VCSA and given it an IP address (8.8.8.1);
All compatibility checks succeed during the Basic configuration mode.
I did notice that when running through the Basic configuration mode that 1d. Select networks: Management network: doesn't give me the option to select the actual management network (which I assume is the hosts management network that is set up when the hosts are installed).
When I try completing the wizard I get the error above.
Any help would be appreciated.
Thanks!
Craig
Sorted this out myself as follows:
* Created a new Reverse Lookup Zone with the IP address of the HA network;
* Added in another A Record for the HA NIC Address on the primary VCSA
* Reran the VCSA HA installation which succeeded.
Tested and all working!
Sorted this out myself as follows:
* Created a new Reverse Lookup Zone with the IP address of the HA network;
* Added in another A Record for the HA NIC Address on the primary VCSA
* Reran the VCSA HA installation which succeeded.
Tested and all working!