VMware Communities
pokerface912
Contributor
Contributor
‎02-14-2013 01:16 AM

probleme de VT-x

when i start to run Ossim i have this problem "This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible.
This host supports Intel VT-x, but Intel VT-x is disabled.
Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting."
please can any one help me to fixe this problem such i have "HP630" and i have a 64 OS (windows 7)
0 Kudos
2 Replies
a_p_
Leadership
Leadership
‎02-14-2013 02:14 AM

Welcome to the Community,

Intel VT-x might be disabled if it has been disabled in the  BIOS/firmware settings or the host has not been power-cycled since  changing this setting."

The message actually tells you what needs to be done. In the physical system's BIOS you need to enable VT-x (Intel Virtualization) and - after saving the BIOS settings - power-cycle the system (power-off/power-on) in order for the changes to take effect.

André

0 Kudos
Borja_Mari
Virtuoso
Virtuoso
‎02-14-2013 02:26 AM

Hi,

try to check this:

http://communities.vmware.com/blogs/VirtuallyITnoob/2010/05/15/requeriments-to-run-64-bits-guests-in...

Hope it helps you Smiley Happy

Regards,

Pablo

------------------------------------------------------------------------------------------------- PLEASE CONSIDER AWARDING any HELPFUL or CORRECT reply. Thanks!! Por favor CONSIDERA PREMIAR cualquier respuesta ÚTIL o CORRECTA . ¡¡Muchas gracias!! VCP3, VCP4, VCP5-DCV (VCP550), vExpert 2010, 2014 BLOG: http://communities.vmware.com/blogs/VirtuallyAnITNoob
0 Kudos