hi
i have a server with win server 2008 r2 with 2 nertwork adaptor
adptor1 for internet with ip valid : 85.xxx.xxx.xxx
adaptor2 with ip 10.100.4.108
subnet:255.255.252.0
10.100.4.1
i want to set ip 10.100.4.117 in virtual win 2003 on the vmware
this ip ranges is on the domain
two virtual network adaptor is on the win server 2008 number 1 's ip : 192.168.234.129
and number 2
how i can set 10.100.4.117 on win2003 so 10 clients can access them via RDP remote desktop
excuse me to my bad english.
Message was edited by: a.p. - For security reasons, you shouldn't disclose your public IP address. I modified it.
Welcome to the Community,
to do this, first open the "Virtual Network Editor" and make sure the internal NIC (rather than automatic) is selected for the Bridged Network. After that you can edit the Windows 2003 VM's network settings and set it up for Bridged networking. In case you are connected to a managed physical switch, make sure port security is disabled (for Cisco switches configure "mode access" and/or make sure "macro desktop" is disabled).
André
Cheers, Yours Udin