I got a Windows 98 SE iso disc. When I install it it was fine until it comes to the final step of the setup it throws to me those weird errors:
Some information relating to my VMware Workstation and hardware if it's necessary:
CPU: AMD Ryzen 5 3500U
OS: Microsoft Windows 10 Enterprise build 18363 (November 2019 update, version 1909)
VMware Workstation version: Pro 15.5
Hi ender_,
Thanks for your reply. I'm on holidays but I spent the time to read your pages about patcher. I have understood from them that patcher fixes only the speed problem. According to the subject "Windows 98 SE installation fails", other problems must fixed for recent CPUs.
Therefore, I wait for other replies of contributors before to act on my new PC.
Regards.
Louis-92.
The patcher fixes both the CPU speed limit bug, and the TLB invalidation bug; it can patch both already installed VMs, and the installation media (note: you'll have to copy the install files to [virtual] hard drive to patch them).
Hello !
After two posts written here at the beginning of August and after different tests, attempts, trials with VMware, I come back into this forum.
My need : transfer from a broken PC (ACER) to a new PC (HP Pavilion Laptop 15-eh1 with AMD Ryzen 5 5500U) the virtual disk vmdk file 2 Go (and others) containing VMware 15.5.1 with W98 applis and their parameters ready to work (these applis have never worked on Windows 10 or 11 hence the need).
Main steps of the process described before (on the new PC) :
(sorry, ender_, this process seemed easier for me that your patcher)
1. Install VMware 15.5.1 and transfer the virtual disk vmdk file 2 Go (and others) from a broken PC to the new one. Options for memory = 400 MB, processors = Virtualize VT-x/EPT or AMD-V/RVI and = Virtualize CPU performance counters.
2. Disable the 32 bit protected disk drivers.
3. Replace the driver ESDI_506.PDR under DOS.
The used ESDI_506.PDR comes from ender_ (thanks to him) formated in ESDI_506 - 48-bit LBA Korrektur.ISO, inside bhdd31.zip, this driver weighs 942 bytes only against 24.406 for the original one.
On the broken PC, working VMware installation has not been modified, reboot under DOS not working, the new PC with VMware either (it was probable with the same vmdk) hence the replacement of ESDI_506.PDR under W98 via a W98 window "DOS commands" (this is not the process described before ...). To be noted that the characters "/" and "_" are accepted only with ALT, the buttons "/" and "_" are not working.
4. Re-enable the 32 bit drivers.
W98 reboots normally without error message (no DLL missing), applis are installed and available, data files are there.
Result after an use of about fifteen hours of the applis W98 : W98 works on the new PC HP (HP Pavilion Laptop 15-eh1 avec AMD Ryzen 5 5500U) with some fails considered as acceptable.
Appli for management of personal counts (exe of 21 MB) : it fails after about 15 raws (debit entry, credit entry, ...), launching of the appli is almost instantaneous, only the raw in progress is lost. Almost acceptable.
Appli about genealogy (exe of 3,1 MB) diverted to manage a data base of etymology : it works well.
Appli designed by myself based on a program under DOS and of macros Winword (exe of 3,3 Mo) producing about 60 HTML files during about 20 mn : macros fails before the end of the process :
... but success after split of the process in 4 steps.
Appli of drawing with layers (PaintShopPro 9, exe of 3,5 MB) : it fails too fast :
I must record very often, it is acceptable for an appli used 1 time per month (but essential for actualization of pictures published 20 years ago).
Thanks to you (of which ender_, creopard) who permit to me handling of files created 20 years ago on a recent PC. I hope this experience (without reboot under DOS, see step 3) will be useful to someone using AMD Ryzen 5 5500U.
Regards,
Louis
________________ french version _________________
Après deux posts ici début Août et après de nombreux essais, je reviens sur ce forum.
Mon besoin : copier d'un PC cassé (ACER) vers le PC neuf (HP Pavilion Laptop 15-eh1 avec AMD Ryzen 5 5500U) le fichier disque virtuel 2Go vmdk (et autres) de VMware 15.5.1 avec les applis W98 et leurs paramètres tout installés (ces applis n'ont jamais fonctionné sur Windows 10 ou 11 d'où le besoin).
Principales étapes du processus décrit plus haut sur le PC neuf :
(désolé, ender_, ce processus m'a semblé plus accessible que votre patcher)
1. Installer VMware 15.5.1 et copier le fichier disque virtuel 2Go vmx (et autres) du PC cassé vers le PC neuf. Options pour la mémoire = 400 Mo, pour les processeurs = Virtualize VT-x/EPT or AMD-V/RVI et = Virtualize CPU performance counters.
2. Désactiver le pilote de disque 32 bits en mode protégé.
3. Remplacer le pilote ESDI_506.PDR sous DOS.
Le pilote ESDI_506.PDR utilisé est celui de ender_ (merci à lui) sous la forme ESDI_506 - 48-bit LBA Korrektur.ISO, contenu dans bhdd31.zip, le pilote fait 942 octets seulement contre 24.406 à celui d'origine
Sur le PC cassé, l'installation de VMware opérationnelle n'est pas modifiée, le redémarrage sous DOS ne fonctionnant pas, le PC neuf avec VMware ne redémarre pas non plus en DOS (c'était probable) d'où le remplacement du ESDI_506.PDR sous W98 via une fenêtre W98 "commande DOS" (ce n'est pas le processus décrit ...). A noter que les caractères "/" et "_" ne sont acceptés qu'avec ALT, les touches "/" et "_" sont sans effet.
4. Réactiver le pilote de disque 32 bits en mode protégé.
W98 démarre bien sans message d'erreur (pas de DLL manquante), les applis sont bien installées, les fichiers de données sont là.
Résultat après une quinzaine d'heures d'utilisation des applis W98 : W98 fonctionne sur le HP avec quelques plantés globalement acceptables.
Application de gestion personnelle de comptes (exe de 21 Mo) : elle plante toutes les 15 écritures ou lignes, le redémarrage de l'appli est quasi instantané, seule la ligne en cours est perdue.
Application de généalogie (exe de 3,1 Mo) détournée pour gérer une base de données d'étymologie : l'appli fonctionne bien.
Appli perso basée sur un utilitaire sous DOS et des macros Winword (exe de 3,3 Mo) générant une soixantaine de fichiers HTML en 20 mn environ : les macros plantent avant la fin :
... mais en découpant en 4 étapes, succès.
Appli de dessin avec calques (PaintShopPro 9, exe de 3,5 Mo) : elle plante assez vite :
il faut enregistrer souvent, acceptable pour une appli utilisée 1 fois par mois (mais essentielle pour pouvoir mettre à jour des images publiées depuis 20 ans).
Merci à tous ceux (dont ender_, creopard ) qui me permettent d'entretenir des fichiers démarrés il y a 20 ans sur un PC récent. J'espère que cette expérience (sans redémarrage sous DOS, cf. étape 3) pourra servir à quelqu'un utilisant un AMD Ryzen 5 5500U.
Cordialement,
Louis
I have had some good success installing Win 9x OS's (including Windows 98 SE) by doing the initial install inside a nested VM (Workstation 8 running on a Windows 7 VM). After everything is installed I then drag out the VM folder to my native system, edit the VMX to disable VMCI and EHCI devices, and finally run the patcher that others in this thread have suggested (you can just run it from bootable floppy image in your VM).
