VMware version: 6.0.0 build-45731
Host OS: Windows XP SP2 (32-bit)
Guest OS: Windows XP SP2 (32-bit)
Host OS ipconfig /all:
Host Name . . . . . . . . . . . . : athlonx2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.214.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.108.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-04-61-49-28-50
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.4.101
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.4.20
DHCP Server . . . . . . . . . . . : 192.168.4.20
DNS Servers . . . . . . . . . . . : 208.67.222.222
208.67.222.220
24.144.0.4
Lease Obtained. . . . . . . . . . : Wednesday, August 29, 2007 9:21:19 A
M
Lease Expires . . . . . . . . . . : Thursday, August 30, 2007 9:21:19 AM[/code]
Guest OS ipconfig /all:
Host Name . . . . . . . . . . . . : vmxp
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter
Physical Address. . . . . . . . . : 00-0C-29-39-8E-9D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.253.78
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :[/code]
VMX file:
virtualHW.version = "4"
scsi0.present = "TRUE"
memsize = "1024"
MemAllowAutoScaleDown = "FALSE"
ide0:0.present = "TRUE"
ide0:0.fileName = "Windows XP Professional.vmdk"
ide1:0.present = "TRUE"
ide1:0.fileName = "auto detect"
ide1:0.deviceType = "cdrom-raw"
floppy0.present = "FALSE"
ethernet0.present = "TRUE"
usb.present = "TRUE"
sound.present = "TRUE"
sound.virtualDev = "es1371"
sound.fileName = "-1"
sound.autodetect = "TRUE"
displayName = "Windows XP Professional"
guestOS = "winxppro"
nvram = "Windows XP Professional.nvram"
ide0:0.redo = ""
ide1:0.startConnected = "TRUE"
ethernet0.addressType = "generated"
uuid.location = "56 4d 38 3a 87 dd bb 70-0e 66 74 e4 22 39 8e 9d"
uuid.bios = "56 4d 38 3a 87 dd bb 70-0e 66 74 e4 22 39 8e 9d"
ethernet0.generatedAddress = "00:0c:29:39:8e:9d"
ethernet0.generatedAddressOffset = "0"
tools.syncTime = "TRUE"
isolation.tools.hgfs.disable = "TRUE"
virtualHW.productCompatibility = "hosted"
tools.upgrade.policy = "manual"
ide1:0.autodetect = "TRUE"
The host computer is connected to a router which is connected to a cable modem. Yesterday, networking was fine--no problems. But this morning I can't get on the network in the guest OS. I haven't changed any settings.
Any ideas? It's very frustrating...
Does your host machine have internet connection?
Does your host machine have internet connection?
Yes, it does.
If your Host is directly connected to the internet communication device, the NIC type in the vmx file is missing: ethernet0.connectionType = "nat"
If you're connected via LAN and a router, the guest is missig the default gateway address.
Andreas Woithon
>If you're connected via LAN and a router, the guest is missing the default gateway address
That's what the OP describes... PC connected to router, connected to cable modem. There's no gateway address because the 169.254.x.y is an autoconfig address given when no DHCP server is reachable, and therefore could not get a gateway address or an IP address.
OP-->
Does your router have MAC address filtering enabled?
Have you either disabled or configured the nVidia firewall?
Yep, but the host has one, so it seems that one is needed ("Does your host machine have internet connection? Yes, it does"). The host IP configuration lists a DHCP server, which is the same as the default gateway. So, at least the host configuration was set via DHCP by the router/internet device.
The Microsoft IP address comes when no other address could be assigned. Therefore, if there is a local firewall on the host which lets all VM traffic pass through, he should
\- configure the virtual NIC with a static IP from the hosts IP network including the default gateway (for testing)
\- check if the DHCP server on the router/internet device went down in the meantime or something else is wrong with it (try "ipconfig /release", "ipconfig /renew" first on the host, then on the guest to check if DHCP is available)
Message was edited by:
AWo
Thanks for the help guys. I rebooted my router, and that seems to have worked now. I'm curious as to why the reboot was needed and why it worked.
Also what is interesting is the fact when I go to the "List DHCP Clients" feature in my router's interface it lists only two computers; one is my dad's PC, and the other is not my host PC but rather the guest PC. Yet, both the host and the guest have a working network connection.
Does your router have MAC address filtering enabled?
Nope.
Have you either disabled or configured the nVidia firewall?
The nVidia firewall is disabled. I do, however, have the Windows firewall enabled. But no changes have been made since yesterday (when things were working).
Edit: BTW, I've been using bridged networking because I had problems with NAT in other guest operating systems.
check if the DHCP server on the router/internet device went down in the meantime or something else is wrong with it (try "ipconfig /release", "ipconfig /renew" first on the host, then on the guest to check if DHCP is available)
When the guest still didn't have connectivity, I tried a Repair Connection on both the host and guest. The host worked fine, but the guest could not repair.
Message was edited by:
j_freeman
Message was edited by:
j_freeman
The best explanation seems to be that the internal DHCP server of your router/internet device was not running or had some kind of problem. Restarting it fixed it, soit started to work again. Therefore your guest was able to receive all it needs (and I bet it has an defualt gateway, now)
Why the router only shows two lesed adresses, hmmm, I guess you checked it after all three machines got an IP address. Who knows...the world is not a perfect place
Andreas Woithon
I rebooted my router, and that seems to have worked now. I'm curious as to why the reboot was needed and why it worked.
This happens time to time, I have to reboot my router at home once in a great while.
I have the same problem as the poster... Except, my router has mac filtering...
I changed the default ips of both VMnet8 & VMnet1 nics {on host} to be similar to other ips in lan, and within a trusted ip range.
My software firewall is setup to trust & share networks of both VMnet8 & VMnet1
My guest OS, win 2003, has that arbitrary ip assigned to its nic. 169.254.208.237 ... what confuses me is that the mac address of the nic there doesn't match neither that of VMnet8 nor VMnet1 devices on host os.
I am confused as to whether I have to put the mac address of both or either VMnet8 , VMnet1's and/or guest OS's nic in the mac address filter.
My VMmachine's network setting is Bridged.
Thanks