VMware Networking Community
MustafaSadek
Enthusiast
Enthusiast

how to add 2 public peer ip for same local subnet on edge in- vcloud

dears i have the following scenario:

site 1 want to connect to site 2 through ipsec tunnel, the issue is i cant add 2 public ips for peer on my edge in ipsec config..and it shows errors

how to do this so that i achieve failover scenrio. if peer 41.x.x.x is failed then i have 213.x.x.x as backup peer?

 

note: i create ipsec configuration by ( vcloud director ) which is located on edge>vpn>ipsec site

error appear:

 Ipsec] It is not allowed to configure the same local subnet 192.168.40.0/24 - peer subnet 192.168.35.0/24 pair., error code 13629

SITE 1

Public  IP

SITE 1

Subnet  

SITE 2

Peer Public  IP

site 2

Peer Subnet  

 169.239.39.x

192.168.x.0/24

192.168.4x.0/24

41.33.178.x

213.212.232.x

(i can't add 2 peer ips )

192.168.x.0/24

 

Reply
0 Kudos
2 Replies
bryanvaneeden
Hot Shot
Hot Shot

Hi @MustafaSadek,

I am pretty sure this isn't possible, atleast it's not as far as my knowledge goes. You can add multiple local/peer subnets though. But you already figured that out.

Visit my blog at https://vcloudvision.com!
Reply
0 Kudos
javi_mapa
Contributor
Contributor

You must set "Same level endpoint" as "any" (case sensitive) and you will just need a VPN Site on "Edge" side of the VPN.

javi_mapa_0-1618246288836.png

 

 
Reply
0 Kudos