cannot deploy DLR

[thanhtung0601]

hi all, i had a problem when i was deploying DLR. I cannot see HA interface configuration (IP address). So, i cannot assign IP for management. May be, it is problem. Please help me solve this bug. tks all. I use Vsphere Esxi 6.0, NSX 6.2.

[thanhtung0601]

[thanhtung0601]

here is error

[bayupw]

Hi, do you use dynamic routing?

You cannot SSH in to the Control VM from the HA Interface as explained in the install guide document below.

If you want to access Control VM, you can SSH to the protocol address when you configured dynamic routing.

If you don't have dynamic routing, then you can use VM Console

Add a Distributed Logical Router

http://pubs.vmware.com/NSX-62/index.jsp#com.vmware.nsx.install.doc/GUID-E825C0C7-F4CC-4B26-90AF-A216...

The HA interface is not supported for remote access to the logical router.

You cannot SSH into the HA interface from anywhere that isn’t on the same IP subnet as the HA interface.

You cannot configure static routes that point out of the HA interface, which means that RPF will drop incoming traffic.

For SSH, use the logical router's protocol address, which is configured later when you configure dynamic routing.