Hi All Expert,
For the NSX-V migration to NSX-T with using the lift and shift migraiton approach.
Can I have the full configuration guide with configure logical bridge between NSX-V and NSX-T.
Much Appreciate
Jordan
Hi @blu3nood,
You can gradually migrate specific parts of the NSX-v logical configuration, or if needed, create some configurations manually in the destination NSX-T environment. When your organization is ready to switch to the new NSX-T environment, you can use Layer 2 bridging to extend networks logically between both environments and move the workloads to NSX-T. For instance, you might want to bridge one network at a time, and gradually move the workloads from NSX-v to NSX-T. After all the workloads are moved to the new NSX-T environment, you can remove the bridge, and finally decommission your old hardware.
Refer:
https://nsx.techzone.vmware.com/resource/nsx-v-nsx-t-3x-migration-coordinator#_Toc57645169
https://mynetworker.blog/2020/06/27/nsx-v-to-nsx-t-migration-using-layer-2-bridging/
Hi
I would like to double confirm. In order to build a bridge for V2T. So at the NSX-V and NSX-T must configure the logical bridge.
Also another thing I would like to confirm is the logical bridge must using the overlay segment to build the logical bridge
Best Regards
Jordan