I have a very simple deployment of NSX-V
Cluster 1=edge esg
Cluster 2=ldr and test vm's
Cluster 3=nsx manager and controllers (out of band, not prepped for vxlan)
Two virtual machines,
3 logical switches
APP_10(for interface 10.10.10.0)
APP_11(for interface 188.8.131.52)
Transit(uplink for ldr, internal for esg)
LDR internal interface 1: 10.10.10.1/24
LDR internal Interface 2: 184.108.40.206 /24
LDR uplink interface: 220.127.116.11/30
ESG internal interface 1 : 18.104.22.168/30
Static routes in the ESG=
10.10.10.0/24 Next Hop=22.214.171.124
126.96.36.199/24 Next Hop=188.8.131.52
LDR Default Gateway=184.108.40.206
for some reason my test vms cannot ping the internal of the ESG, and my ESG cannot ping my test vms. i can ping each interface on the LDR from the ESG, but i cannot communicate past the LDR's internal interface.
in reverse, my VM's can ping each other on different networks, and can ping the uplink to their LDR, however they can not contact the internal of the ESG
no firewalls have been configured at this point.
im not sure what i have configured wrong. any help will be much appreciated
are you able to ping from ESG towards DLR forwarding IP , other way around ??
because to test IP connectivity from the uplink interface from the control VM, OSPF or BGP must be configured or at-least enabled, for static routing control VM is not required basically.
Also move your Edge and Test VM onto the same host and see if that helps ?
Can you check firewall on ESG? Its default policy is Deny if you didn't change it during deployment.