Hi Team,
I have configure the BGP using N9K Leaf switches but now I have a problem getting one BGP session is Established and another is in Active state.
Bellow is shema and BGP configuration:
BGP Configuration:
It is strange to me, however, that a BGP session for Neighbour 10.101.131.251 Established when I shut down interface Eth17-18 on Leaf1 Switch, of course, in this case, the BGP session falls to Neighbour 10.101.31.251.
Can anyone help me on this ?
Are you using that teaming-1 and teaming-2 ?
It look like something goes wrong there. Did you assign that teaming to the vlans you use for the connection to the leaf's ?
Hi,
Can you ping the neighbor when you login on edge ?
get logical-router
(search for your SR part of the T0 and look at the vrf number)
vrf x
get bgp neighbor summary
ping the neighbor.
I can't ping the neighbour 10.101.131.251
But when I shut down interfaces on Leaf1 Switch is pingable:
Hi,
What does your edge-uplink-profile look like ?
Bellow is EDGE profile:
EDGE is design by VVD:
EDGE VM Network adapters:
Port Groups for EDGE Uplink:
EDGE-Uplink1 PG
EDGE-Uplink2 PG:
Are you using that teaming-1 and teaming-2 ?
It look like something goes wrong there. Did you assign that teaming to the vlans you use for the connection to the leaf's ?
Are you using that teaming-1 and teaming-2 ?
Where should I set this up
It look like something goes wrong there. Did you assign that teaming to the vlans you use for the connection to the leaf's ?
No
It works,
Thank you for your Help.
I added Teaming policy to the TZ and assign teaming policy to the VLAN segment.
Just wanted to say that 🙂