VMware Networking Community
HAL_TD
Contributor
Contributor

NSX 3.2.2, Edge Tunnels down

Hello guys !

I am trying to configure my NSX "collapsed" platform and meeting some problems, certenlly due to a miconfiguration from my side that's why I'll decribe what I want to set up and what I have as a platform

platform description :

01 vCenter 

01 cluster with 3 hosts (esxi) hosting (NSX Manager, Transport Nodes, Edge Nodes & VMs) 

01 NSX manager 3.2.2

VDS 7.0

02 Edge Nodes (in clustering)

01 x T0 Gw

3 x segments

Mnagemnt subnet = 172.23.0.0/16 ; vlan id 323

01 x IP range for Overlay. 

Problem : 

After configuring then first segment connected to T0-Gw  the tunnels status are down ! could you help to solve and understand what's the problem please ? 

I'll attach some screanshots to help understanding. 

Thanks a lot

 

 

 

 

Reply
0 Kudos
3 Replies
shank89
Expert
Expert

A single TEP network, with the Edge nodes on the hypervisors also being enabled for NSX and on the same network; either requires a redesign of the VDS or to configure inter TEP networking.

Have a look here https://www.lab2prod.com.au/2020/11/nsx-t-inter-tep.html

Shashank Mohan

VCIX-NV 2022 | VCP-DCV2019 | CCNP Specialist

https://lab2prod.com.au
LinkedIn https://www.linkedin.com/in/shankmohan/
Twitter @ShankMohan
Author of NSX-T Logical Routing: https://link.springer.com/book/10.1007/978-1-4842-7458-3
HAL_TD
Contributor
Contributor

Thank you so, I'll visionase your presentation and read what you posted. Hopefully, be able to fix this issue. 

I'll give you a feedback. 

Thx

Reply
0 Kudos
lukasrueckerl
Enthusiast
Enthusiast

Hi,

the easiest way to resolve this issue in my designs is to first add the Transport Nodes to the Transport VLAN, then configuring a separate VLAN-Backed Segment on the Transport Zone. You can then use this VLAN backed segment as the overlay NIC on the Edge VM.

Regards,

Lukas 

Regards,
Lukas

-------------------------------------------
VCIX-NV + VCIX-DCV 2023
Please mark resolved issues as such. Kudos are appreciated.
Reply
0 Kudos