VMware Networking Community
BruceTroeller
Contributor
Contributor
Jump to solution

DNAT on ESG- how to add "Source Port/Range"?

Hello, I'm confused on how to port forward or forward based on port, can this be done?

Is there something to do to enable the Source Port/Range box?  Or is there another method?

The scenario is a user must connect from the ESG uplink (external vlan)  to 172.16.1.11:10389 and will be translated to 192.168.100.10:3389 on an internal i/f

172.18.1.11:10389 -> 192.168.100.10:3389

pastedImage_4.png

Here are the interfaces

pastedImage_5.png

P.S.  I'm not trying to do PAT I understand that works when multiple ip addresses are behind an SNAT (based on the reading I've done)

Tags (2)
1 Solution

Accepted Solutions
lhoffer
VMware Employee
VMware Employee
Jump to solution

Once you select a protocol that uses ports like TCP or UDP from the protocol drop down it'll enable the additional fields.

View solution in original post

2 Replies
lhoffer
VMware Employee
VMware Employee
Jump to solution

Once you select a protocol that uses ports like TCP or UDP from the protocol drop down it'll enable the additional fields.

BruceTroeller
Contributor
Contributor
Jump to solution

Thank you!

This solved the problem, I should know better.  :smileyblush:

Thanks again!!

Bruce

Reply
0 Kudos