VMware Networking Community
vSohill
Expert
Expert
Jump to solution

DLR and Controllers

Hi,

Does DLR has a connections with DLR indoreder to uppdate their tables ?

1 Solution

Accepted Solutions
sk84
Expert
Expert
Jump to solution

LMGTFY

...

Or more specific:

DLR Control and Management Plane Components and Communications

NSX Routing Subsystem Components

NSX Components

In short (so you don't have too much work with a simple Google search):

For each DLR instance, there is a DLR Control VM, which is running on one of the ESXi hosts; the DLR Control VM has two communication channels:

  • VMCI channel to the NSX Manager via vsfwd, which is used for configuring the Control VM
  • VMCI channel to the DLR master Controller via netcpa, which is used to send the DLR’s routing table to the Controller
--- Regards, Sebastian VCP6.5-DCV // VCP7-CMA // vSAN 2017 Specialist Please mark this answer as 'helpful' or 'correct' if you think your question has been answered correctly.

View solution in original post

0 Kudos
5 Replies
Sreec
VMware Employee
VMware Employee
Jump to solution

I'm sorry, your question is not clear .Are you asking if DLR kernel module interact with DLR Control VM ?

Cheers,
Sree | VCIX-5X| VCAP-5X| VExpert 7x|Cisco Certified Specialist
Please KUDO helpful posts and mark the thread as solved if answered
0 Kudos
vSohill
Expert
Expert
Jump to solution

Thank you Sreec,

My question is regarding DLR control VM and NSX Controller.

0 Kudos
sk84
Expert
Expert
Jump to solution

LMGTFY

...

Or more specific:

DLR Control and Management Plane Components and Communications

NSX Routing Subsystem Components

NSX Components

In short (so you don't have too much work with a simple Google search):

For each DLR instance, there is a DLR Control VM, which is running on one of the ESXi hosts; the DLR Control VM has two communication channels:

  • VMCI channel to the NSX Manager via vsfwd, which is used for configuring the Control VM
  • VMCI channel to the DLR master Controller via netcpa, which is used to send the DLR’s routing table to the Controller
--- Regards, Sebastian VCP6.5-DCV // VCP7-CMA // vSAN 2017 Specialist Please mark this answer as 'helpful' or 'correct' if you think your question has been answered correctly.
0 Kudos
vSohill
Expert
Expert
Jump to solution

Thanks sk84

Does DLR Control VM need to be in the same subnet and same portgroup with the NSX manager ?

0 Kudos
sk84
Expert
Expert
Jump to solution

Does DLR Control VM need to be in the same subnet and same portgroup with the NSX manager ?

No.

--- Regards, Sebastian VCP6.5-DCV // VCP7-CMA // vSAN 2017 Specialist Please mark this answer as 'helpful' or 'correct' if you think your question has been answered correctly.