HI
setup is 2 vcenter 6.0
NSX 6.4.2
while adding the Secondary nsx manager getting error certification verification fails Note ( For testing i have tried with wrong password ) that time also getting the same error
ip reachable is there . and vcenter 1 displayed both the NSX manager .
Tshoot tried
NSx node id are different
VXlan is same on both .
Please can some one help
regards
Raja
The KB in the first link in my earlier reply shows what would be the error message on vsm.log if there are port issues on 443 or UDP VXLAN port mismatch.
The second links has similar issue but has different error which also showing on the NSX Manager log
You may want to check the NSX Manager/vsm log and see if the log entries point to something.
If you don't mind, you can also share the NSX Manager/vsm.log here.
Else, you would need to open a case to VMware Support
Hi, do you mean NSX 6.2.4?
Could you share what is the error message?
Check these links if any of those are helpful:
Adding a Secondary NSX Manager to the Primary NSX Manager fails (2145937) | VMware KB
error when join secondary nsx manager to Master Nsx manager
If you need to review the cross-vcenter install you can review the guide here:
VMware NSX for vSphere 6.2 Documentation Center-Cross-vCenter Installation Guide
VMware NSX for vSphere 6.2 Documentation Center-Add a Secondary NSX Manager
Prerequisites
HI
Please find attached screen shot
i have went through the guide looks i have followed all .
The KB in the first link in my earlier reply shows what would be the error message on vsm.log if there are port issues on 443 or UDP VXLAN port mismatch.
The second links has similar issue but has different error which also showing on the NSX Manager log
You may want to check the NSX Manager/vsm log and see if the log entries point to something.
If you don't mind, you can also share the NSX Manager/vsm.log here.
Else, you would need to open a case to VMware Support
Hi Raja, did you found the problem and the resolution?