Hello all,
I have a small fully collapsed environment on NSX-T 3.0. All the transport zones use the same two pnics.
Everything was working fine, nothing changed on the environment, but a few days ago VMs on vlan transport zone stop reaching VMs on overlay segments. But VMs on overlay segments can reach VMs on vlan transport zone.
If i ran traceroute command from a VM on the vlan tz, the last hop is the ip address of the interface configured on the T0.
DFW and Gateway firewall,only have the default rules allow any, active.
I don't have any alarms on the environment and i also restart the edge nodes.
Any ideas?
Thanks.
Regards.
Have you got any firewall rules configured ?
You could try doing a traceflow from the edge-plink port and see if anything gets dropped. Unfortunately you cannot do a trace from an ip outside nsx.