Hi everyone
i am a new guy in the VM technology. i am doing R$D in it
Recently i installed VM ESX 3.5 server and configured three virtual machines which are connected to SAN via Fiber channel cord. the issue is i cant ping some physical(wk23 AD, Lotus Domino,LotusSametime etc) machines in the same network. its fine working with all other machines connected in diffrent subnets. pls let me know you valuable recommendation..
fine mike.. i will explain...see i have an ibm x series box with six gigabyte adapters.one for service console and other for vmotion. the rest four are dedicated for VM's. the ESX host machine is connected through two HBA adapters to the SAN. my requirement is like; each vm need two network adapters and 2 gb RAm etc .etc... once the virtual machine is up and enbaled one adapter to 172.16.1.140, i cannot connect to the gateway(172.16.1.222). meantime i can access all subnet one machines including AD. later i removed the second network adpter and checked for connectivity outside the subnet. fine it worked. .(is ther any thing like teaming of network adapters in the vm's)but this time i cannot connect to AD and Lotus...i think you got the brief of my issue
note.All the phyical switch ports are configured to trunk
Hi,
Yes there are issues with that configuration. Primarily the two nics at the vm level. The underlying ESX host will place each vm on a specific nic based on teaming route policy and the MAC will register on the switch at a port level so it will have trunk issues. You need to use IP route based policy and not the default port ID.
Regards,
Mike
vExpert 2009
Hello Mike,
Thanks a lot and i really appreciate your valuble command. since i changed it to IP Based Route, every thing started working fine. now i can connect the Vm to AD, Lotus etc. it was such a wonderful experience to have a chat with you.