duzolini
Contributor
Contributor

VCB Warnings

Hello, I install the vcb and Arcserve Vmware Agent but I receive this warnings.

Sometimes I can do the backup, but anothers, the arcserve wait a long time, the vcb start to copy the vms to the server disk but Arcserve get a error and don t backup.

Also, I would like to know where is the vcb config file, I change the config.js but they dont change anything in my actual configurator.

And I would like to know, how I know if my vbc is using the fiber channel or the network,

Below I have the warning log.

Current working directory: C:\Program Files (x86)\VMware\VMware Consolidated Backup Framework

HOSTINFO: Seeing Intel CPU, numCoresPerCPU 4 numThreadsPerCore 1.

HOSTINFO: This machine has 1 physical CPUS, 4 total cores, and 4 logical CPUs.

Using system libcrypto, version 90709F

SSLVerifyCertAgainstSystemStore: Subject mismatch: VMware vs COANDCVCVM

SSLVerifyCertAgainstSystemStore: The remote host certificate has these problems:

  • The host name used for the connection does not match the subject name on the host certificate

  • A certificate in the host's chain is based on an untrusted root.

SSLVerifyIsEnabled: failed to read registry value. Assuming verification is disabled. LastError = 0

SSLVerifyCertAgainstSystemStore: Certificate verification is disabled, so connection will proceed despite the error

SSLVerifyCertAgainstSystemStore: Subject mismatch: VMware vs COANDCVCVM

SSLVerifyCertAgainstSystemStore: The remote host certificate has these problems:

  • The host name used for the connection does not match the subject name on the host certificate

  • A certificate in the host's chain is based on an untrusted root.

SSLVerifyIsEnabled: failed to read registry value. Assuming verification is disabled. LastError = 0

SSLVerifyCertAgainstSystemStore: Certificate verification is disabled, so connection will proceed despite the error

Copying "[coanvmfs] coandcctx01/coandcctx01.vmx":

0%=====================50%=====================100%

**************************************************

Copying "[coanvmfs] coandcctx01/coandcctx01.nvram":

0%=====================50%=====================100%

**************************************************

Copying "[coanvmfs] coandcctx01//vmware-1.log":

0%=====================50%=====================100%

**************************************************

Copying "[coanvmfs] coandcctx01//vmware-2.log":

0%=====================50%=====================100%

**************************************************

Copying "[coanvmfs] coandcctx01//vmware.log":

0%=====================50%=====================100%

**************************************************

Converting "C:\Program Files\CA\ARCserve Backup Client Agent for Windows\VmwareVcbMountDir\COANDCCTX01\scsi0-0-0-coandcctx01.vmdk" (compact file):

0%=====================50%=====================100%

0 Kudos
1 Reply
AndreTheGiant
Immortal
Immortal

About the warning don't worry... are related to a certification mismatch (the common name in the certificate is not the same that your used).

how I know if my vbc is using the fiber channel or the network

You can increase the log level, but if you use SAN transport mode, you are sure to use the FC connection.

Andre

Andre | http://about.me/amauro | http://vinfrastructure.it/ | @Andrea_Mauro
0 Kudos